d98e788847
ENH:Improving the AMS display of empty disks
...
It is difficult to distinguish between blank and empty thumbnails, so adding a diagonal line on the empty disk indicates empty
JIRA:STUDIO-4515
Change-Id: I46038c9256fc43927976b82f29ea895ce907d247
2023-11-01 09:33:21 +08:00
a518467c23
FIX: [MAK-2011 MAK-1988] Fix synchronization issues
...
Jira: MAK-2011 MAK-1988
Change-Id: I411bd185c8cb9f314b74ca91ad5fa303562ed4e3
2023-11-01 09:33:21 +08:00
14a3b244a0
FIX: cmd line auto arrage for sequential printing not working
...
min_obj_disance was not set for sequential printing of cmd line.
Jira: None
Change-Id: Idce14aedf8448a0917533efb93f7c78fff34587d
2023-11-01 09:33:21 +08:00
998f53a585
ENH: [STUDIO-4047] Export presets dialog
...
Jira: 4047
Change-Id: I91c5b684784c6c3e31fa0ac53698976732f843cf
2023-11-01 09:33:21 +08:00
4ebbb7db42
FIX: [STUDIO-1400] The scaling problem of the device status interface
...
Jira: STUDIO-1400
Change-Id: I37b736c25367aa9db3a1258482a0e3db53a8da97
2023-11-01 09:33:21 +08:00
3013d89b6b
FIX: Adjust error information storage method
...
Jira: XXXX
Change-Id: If6564f6425678faa2df9b08d9c7642afb7ffbe50
(cherry picked from commit 9df5c5afdbdcb22b6af41f4b953e56ca8e736989)
2023-11-01 09:33:21 +08:00
6612086816
ENH: do not leave a gap for top interface if the top z distance is 0
...
Previously when the overhang is a slop, it's controled by the xy
distance. Now we control it with top z distance as long as it's an
interface.
Note: Not working with Snug support, which has a different mechanism of
support interface.
Jira: STUDIO-3991
Change-Id: I1b7c4cf892b4c4ec2f3e668bd966ab0971212364
(cherry picked from commit c094b5ec83dc98dca7a8b8c0438b8f1994134db6)
2023-11-01 09:33:21 +08:00
a631e6cb99
FIX: tree support detect overhang inaccurate
...
Jira: STUDIO-3657
Change-Id: I1ef4ca3ec299b121eb467afc12acee68e0f12b39
(cherry picked from commit 36f8937ae0d0d79c7558662903fffef20b528cb8)
2023-11-01 09:33:21 +08:00
2bd6b11505
ENH: improve auto-arranging objects with tree support
...
We decide to set brim width of all objects to MAX_BRANCH_RADIUS_FIRST_LAYER if there is an object with tree support after discussion.
Jira: MAK-2009
Change-Id: I4c4940800632c433235966b01c44ac910e33a51c
2023-11-01 09:33:21 +08:00
d462a4af8e
FIX: print by object not support timelapse for I3
...
Jira: XXXX
Change-Id: I8354971843f1e020db0f6407348cfa220ad514f2
(cherry picked from commit 8e8d0c47bdc7f60be901575b1202a1fc0e1942db)
2023-11-01 09:33:21 +08:00
3225a1965d
FIX: Label wrapping is incorrect(Embeded depth)
...
Jira: 3328
Change-Id: I637a485e62651c8ed6743dd3648089a78dff8467
2023-11-01 09:33:21 +08:00
73065641c0
FIX: [STUDIO-4387] fix extension of save project name
...
Change-Id: Ie287abc4c65fab134b9bf1ff24baf0dd36b728df
Jira: STUDIO-4387
2023-11-01 09:33:21 +08:00
aa1cbe0388
FIX: [STUDIO-4207] use t_utc from device message
...
Change-Id: I380d10fb14621c3dd6cec5001e298e915f221189
Jira: STUDIO-4207
2023-11-01 09:33:21 +08:00
a61efc4da8
FIX: [STUDIO-4480] virtual camera can use local url
...
Change-Id: I52929d207474940b72b15bbb357d0cbd198f1401
Jira: STUDIO-4480
2023-11-01 09:33:21 +08:00
cf0f97cc05
ENH:update chamber temperature display rules
...
jira:[STUDIO-4485]
Change-Id: Id50faad48a488ab6e31fef0ab0448708356867f7
2023-11-01 09:33:21 +08:00
64ee3d946f
FIX: auto arrange may put objects with tree supports too close
...
Increase the brim width to the max full diameter of tree supports.
Jira: MAK-2009
Change-Id: If44da7107f79eddccca42a54484806269e3fee5c
2023-11-01 09:33:21 +08:00
e7c380b364
FIX: fix memleak related to config clone
...
JIRA: none, found by self test
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: Ifbab17d543c60a767c0a53e1bca7dfe77bd8fbec
2023-11-01 09:33:21 +08:00
92f2d8c37c
NEW: add plate tab at objectlist
...
Jira: STUDIO-4154
Change-Id: Id24517df3c15cc3907cb6b1fe0ea9d1b6c6d1e56
2023-11-01 09:33:21 +08:00
ca02ea749e
NEW:added check nozzle diameter and nozzle type
...
jira:[new]
Change-Id: Icc6951b861258f367d4f9c1784842965896555e4
2023-11-01 09:33:21 +08:00
aecb5a3a67
ENH:modify the chamber temperature to float
...
jira:[new]
Change-Id: Ibd7e71e8d6e7f43767ca754481ac864c73b98057
2023-11-01 09:33:21 +08:00
525dc74bca
FIX:display vt tray unload steps
...
jira:[STUDIO-4490]
Change-Id: I8c6037c760b116a99929b0fbaf63fbde5f9bf5ee
2023-11-01 09:33:21 +08:00
8b428c4ea5
FIX: handling for some memory leak
...
JIRA: none. find by self test
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I450e872039331ccbbf885540dfa526704afe1c20
2023-11-01 09:33:21 +08:00
f9f7c56cb9
ENH: [MAK-1984] show error message when upload failed
...
Jira: MAK-1984
Change-Id: I89293d3a1136e1764faca3bb9b78412dfb427bd9
2023-11-01 09:33:21 +08:00
26b8ca6599
NEW:add flat shader for cut tool
...
Jira:STUDIO-4227
thanks for PrusaSlcer and enricoturri1966
commit 76d1d4949bbd0964717f8112aae992a1267c5eb4
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Mon Mar 21 13:10:47 2022 +0100
Tech ENABLE_GL_SHADERS_ATTRIBUTES - Added shaders for glsl version 140
...
Change-Id: I4db00805830f07a5eaa95cfc7b8254c61b86f0c8
2023-11-01 09:33:21 +08:00
b32b1d2462
FIX: fix null pointer in save_printable_area_config api
...
Jira: STUDIO-4209
Change-Id: I71649e2f7aa0a76e13da7ef6d555c0a66a067799
2023-11-01 09:33:21 +08:00
2b593ce378
FIX: adaptive layer height may mess up support layers
...
We must ensure when independent support layer height is enabled, the
support layers are strictly synced with object layers. Otherwise, the
wipe tower toolchange may be messed up.
Jira: STUDIO-4097
Change-Id: I6208653f9665b15d028940d5e130c9e895629fc2
(cherry picked from commit 41d35c8af152c91cb356a68d88a879a115b44778)
2023-11-01 09:33:21 +08:00
f47a0408e7
FIX: [STUDIO-3921] orientation bug
...
JIRA: STUDIO-3921
fix the orientation bug that multiple objects does not perform the same
increase num of hull faces to iterate
Change-Id: I9c662e1e7858521585de612d7f1e9cd213e183bb
(cherry picked from commit 6a781a338df9d5a009ac5a667e8b1bc8009e32a9)
2023-11-01 09:33:21 +08:00
6a5e3b3646
ENH: add cost info when loading GCode file
...
Add total cost infomation when loading Gcode file
jira:STUDIO-4353
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I930cb141e2a0b3cf328515f6543707c8bd5d620a
2023-11-01 09:33:21 +08:00
81bab138b5
ENH: seperate wipe tower weight from model
...
jira:STUDIO-4353
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ia8a030314ab995c57a0990d08a966382f6f0eecc
2023-11-01 09:33:21 +08:00
394a602e8f
FIX: Revert "[STUDIO-3361] hide model mall"
...
This reverts commit a6dfd79ea40e16a4942971ee8c5a0000a0b749d7.
Reason for revert: not master
Change-Id: If3e14e6f42bc05cdce610a1beb65c592fbb998fd
(cherry picked from commit 6fe189b233491b3700cdcc9a3c1d54d30754d06e)
2023-11-01 09:33:21 +08:00
6a356d0161
ENH: [STUDIO-4333] show error dialog for preset update fail
...
Change-Id: Iace2911956f083b798d88109761302a0341f0f37
Jira: STUDIO-4333
2023-11-01 09:33:21 +08:00
181b05c236
ENH: tree support uses accurate lslices
...
For tree support, use lslices as tree support island when generating brim,
as this is faster and more accurate.
For normal support, still use "support_fills.polygons_covered_by_spacing()" as support island when generating brim;
Jira: studio 4332
Change-Id: Ibfadd3a166606f824e5780b57112fff221470aaf
(cherry picked from commit 64960b19818c7029eaaaf3d8a89804aeaa26f11d)
2023-11-01 09:33:21 +08:00
bf23f6f023
NEW: add TransformationSVD and some apis in Geometry
...
Jira:STUDIO-4227
add TransformationSVD and some apis in Geometry for cut tool
these code from PrusaSlice,thanks for enricoturri1966
the original commit message:
commit 22ccb5657834e1b2fe548dc647a77044bc9c38f4
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Thu Feb 2 09:07:03 2023 +0100
Added class TransformationSVD to detect transformation matrix components using singular value decomposition
...
Change-Id: I4ce736449029d1fec22def20ef50fa20e1f48713
(cherry picked from commit da9e8127f5214f095da2db9a7898d2e0e84a0214)
2023-11-01 09:33:21 +08:00
487c86e915
NEW: support to edit bed stl and texture for third-party printers
...
Jira:STUDIO-4209
some codes are referenced form PrusaSlicer,thanks enricoturri1966 for the original commit
commit cf380fb4564fec4bd731e34819102f66fda23e75
Author: enricoturri1966 <enricoturri@seznam.cz>
Date: Tue Sep 21 13:51:57 2021 +0200
Tech ENABLE_OUT_OF_BED_DETECTION_IMPROVEMENTS - Out of bed detection for circular printbeds
...
Change-Id: I1b1e2ff045286566d4fb9f2d8ad4faa1f135f60c
(cherry picked from commit 284bca9f1f4cdb9eb405e8205cd50666a2b0b2a0)
2023-11-01 09:33:21 +08:00
384b0793ff
FIX: CLI: fix the png decoding error
...
JIRA: MAK-xxxx(no jira currently)
Change-Id: Id99511355cec7a51cafd5254f308c60a7ac1f57d
2023-11-01 09:33:21 +08:00
8f5a2bb229
ENH: increase the warning level of which blocking cloud slice
...
Jira: STUDIO-4457
Change-Id: I9a3be983cd5c585ed498829482e6b2202f4d5717
2023-11-01 09:33:21 +08:00
4d5fbb03f0
ENH: set skirt_distance maximum value to 50
...
Github:2318
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I538d48321552b110d6fe2949c3202077f788da41
(cherry picked from commit 286926648b378100e522cefb664c095a2ba7b619)
2023-11-01 09:33:21 +08:00
a939c6e434
ENH: auto adapt distance in arrangement
...
JIRA: STUDIO-4408
1. if min_obj_distance is 0, use auto mode
2. normal support, 5mm gap, tree support, 22mm gap, no support, 0.1mm
gap
Change-Id: I906ccf267bef1f33a946572614d658fd50cfcda3
(cherry picked from commit 771efc935da625d8faa4cc5b77fedc5055f93c6c)
2023-11-01 09:33:21 +08:00
5e912dc541
FIX:describe plater to plate
...
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
Change-Id: Ia537e069ccdb08a35434422dea4e2806efad8f10
2023-11-01 09:33:21 +08:00
2336c56887
FIX:Crash caused by calibrating dialog constructors
...
JIRA: STUDIO-4416
Change-Id: I7a15b773ab4df86f3e4234dcd8275fd8e17fad19
2023-11-01 09:33:21 +08:00
2ad11b3ed2
FIX:Color mapping,select the same material
...
The consumables synchronized by AMS are prepared to be set to the same slot as AMS in the disk. However, after initiating printing, the slot value of the modified consumables sorting is not the set material
Jira:STUDIO-2564
Change-Id: I839b10a1b8169091c4e495beb6a15354e436f325
2023-11-01 09:33:21 +08:00
88ba163383
NEW: re-add printable_area config
...
Jira: STUDIO-4052
Change-Id: I31d1bbeba3adaf612bbef5e90d1be182c629e212
2023-11-01 09:33:21 +08:00
7e51bf41a1
NEW: add snap connector
...
Jira:STUDIO-4227
most of the codes are referenced from PrusaSlicer,thanks YuSanka for the original submits
commit 7cd99d98f537198b78158feced2aa8977bfcbe08
Author: YuSanka <yusanka@gmail.com>
Date: Wed Jul 12 18:06:51 2023 +0200
WIP: Cut with Rivets
* Code refactoring: get_connector_mesh() and apply_cut_connectors() moved from ModelObject to CutGizmo.
* Allow to change values of space and bulges for snaps
7cd99d98f5
...
Change-Id: Id4c7991a0ed5bf9608823601775920a81a3dd1c4
2023-11-01 09:33:21 +08:00
5658d32633
FIX: enable wireframe in paint tool
...
Jira: STUDIO-3996
The buffer data submitted when the wireframe function is closed is half less than the buffer data submitted when the wireframe function is open
Change-Id: I92542190a5a45f562ec89d7c41fef3cdf1c26418
(cherry picked from commit b95650954f8bdb0cf81a2063efba4b2fced13a2f)
2023-11-01 09:33:21 +08:00
5225e8d891
NEW:add a prompt after importing
...
jira:[for model mall import]
Change-Id: Ie9b418242f5e30dbd034c10aea0fd9735fb0717e
2023-11-01 09:33:21 +08:00
b0954a164c
ENH:update base64 conversion method
...
jira:[for model mall]
Change-Id: Ia609ae4a559e0e2711e37db32738c057e8a8a33a
2023-11-01 09:33:21 +08:00
a73b97f083
FIX: korean font display issue
...
Jira: STUDIO-3995
Change-Id: If92b05c1a38041f976fc5a5823feb674549c4993
2023-11-01 09:33:21 +08:00
098652e754
FIX: filament override is not correct
...
Multiple filament slots does not change the actual filament settings
Jira: 3797
Change-Id: Ib377b4c79aae731caa97b408e84a87a33b3bb155
(cherry picked from commit 7d704d8f0bae14f16087c77c1bd90946632330a6)
2023-11-01 09:33:21 +08:00
028326c5b4
ENH:update text in auto refill
...
jira:[STUDIO-4344]
Change-Id: Ieb1f40e03fd4a266b768f8b97e28328858fe63cc
2023-11-01 09:33:21 +08:00
29dca94b32
ENH:http request to download avatar file
...
jira:[STUDIO-4327]
Change-Id: Ifc3314d8c03eca0475616ef67990e63e72366638
2023-11-01 09:33:21 +08:00
405886925c
FIX:fixed the issue of IP changes
...
Change-Id: Iff87825ae92effa5a4e473d7282c172c6871c0cf
2023-11-01 09:33:21 +08:00
c5db5551bf
FIX: skip gcode path conflict check for adaptive layer height
...
adaptive layer height won't work with conflict checker because m_fake_wipe_tower's path is generated using fixed layer height.
Jira: STUDIO-4442
Change-Id: I964a69af2fa0be8224ffc11e4c86f8ccf6dbf152
(cherry picked from commit e8c915f9e0b8c8f6cb549259b20d6d850a06d7d3)
2023-11-01 09:33:21 +08:00
c00f944308
ENH: add func to get filament hrc by type
...
1.Support get filament required hrc by filament type
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: If0c1699331b75da17380b9eeca7bb155d98a14c2
2023-11-01 09:33:21 +08:00
67f23cc1c2
FIX: add log for cali
...
Jira: XXXX
Change-Id: I4ba755e4700122bd331f8d95ec4b1a09f4b7b5f9
2023-11-01 09:33:21 +08:00
ff10078fa7
FIX: crash when import svg
...
Jira: 4084
Change-Id: Ib81631615208b0c884c5ce36211841292c2e3ea3
2023-11-01 09:33:21 +08:00
76d073a9ea
ENH: improve auto arranging's wipe tower logic
...
1. If there is already a wipe tower on current plate, leave it there regardless need_wipe_tower flag.
This is useful when we have toolchange custom gcodes.
2. Correct wipe tower pos to prevent it outside bed.
Jira: STUDIO-4426
Change-Id: Iedecc7c5fe7ced01533d0a302253841046a7fb42
(cherry picked from commit e8d728e46b12baaf9fb0e87e3d14197ae3616826)
2023-11-01 09:33:21 +08:00
845a397e37
ENH: optimize some descriptions of search
...
JIRA: NONE
Change-Id: Idbd11287fe1d9aa679a7b622f0cdb378410a4293
2023-11-01 09:33:21 +08:00
debbed13d6
FIX:[STUDIO-4108] rename when load STL/STEP
...
JIRA: STUDIO-4108
github: #2325
Change-Id: Ibec16c822c0e8aeb1c064633225c7f500eb6990d
2023-11-01 09:33:21 +08:00
0e8b85842a
FIX:translation of input IP address dialog
...
JIRA:STUDIO-4418
Change-Id: I65fdfdcd1c0f348bb4b4a07e025aa3d2c5ed9dd3
2023-11-01 09:33:21 +08:00
4f356c70eb
FIX: assemly view operation didn't update wipe tower
...
Jira: STUDIO-3307 STUDIO-3164
Change-Id: Iad6dc3df59d55e35abb313e9287df0f3b4485fe3
2023-11-01 09:33:21 +08:00
1e99ce9535
ENH: select a volume in assembly view can enter painting
...
In assembly view, default selection is volume and painting needs an
object. It's inconvenient to select a full object to get in painting.
Jira: STUDIO-3322
Change-Id: I980e5a3ca7a9c5cf2800f28a38c1c68b978a343b
2023-11-01 09:33:21 +08:00
76f3f22bcc
FIX: layer height cannot exceed limits
...
Jira: STUDIO-4279
Change-Id: I9c580f9192f7d37123d76e72a62022a48c2a5315
2023-11-01 09:33:21 +08:00
1a24681885
NEW:optimize printer config files
...
jira:[STUDIO-4051]
Change-Id: I77cb16e62546eae63a73f8d12d7f11f496555197
2023-11-01 09:33:21 +08:00
aa87c4fd34
ENH: add anti-Aliasing when generating small thumbnail
...
JIRA: STUDIO-4374
Change-Id: I9bd9cadd1b3b226d1679a00d5a129c4ed9cb1828
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:33:21 +08:00
48fcf4b012
FIX: spiral vase not support timelapse for i3 structure
...
Jira: XXXX
Change-Id: I2dd5c285c4d687d72a2dfcf94d0ff75a4d5dd498
2023-11-01 09:33:21 +08:00
15d15cd3aa
FIX: The calibration temp of the temp tower is incorrect
...
Jira: 4382
Change-Id: Ib44f4e0e9309b89a3e6364541d775b30ca4c6d70
2023-11-01 09:33:21 +08:00
3c9ea83ede
ENH:K value and ? overlapping and AMS selection display
...
JIRA: STUDIO-3777
Change-Id: I59c9fd44bd23aaf26bfbad17e618eb5440ca7db3
2023-11-01 09:33:21 +08:00
1340eccb87
FIX: CLI: disable wipe tower under sequent-print mode
...
JIRA: STUDIO-4409
Change-Id: I7a3552180a31613244afeebdfcd9bc6b4d8b13b5
2023-11-01 09:33:21 +08:00
7b4669d715
FIX: [STUDIO-4036] load filament_id when reload user filament preset
...
Jira: 4036
Change-Id: I4a47e31938b9ebe26f0d7769bcf21098161084bb
2023-11-01 09:33:21 +08:00
ae7b205e10
ENH: 3mf: refine the rels to correct link
...
JIRA: STUDIO-4231
Change-Id: I02ff6343124ef2ea3642e5799469249538a4b97f
2023-11-01 09:33:21 +08:00
9757ec5fc3
FIX: translate for cali
...
Jira: 4141 4260
Change-Id: I2a426421985c74217d547329b935c8986e75fbe5
2023-11-01 09:33:21 +08:00
3347ce92df
FIX: PA cali results are not obvious(0.2mm diameter)
...
Jira: XXXX
Change-Id: Ie7dd6f39f8cc396f65bdb9ef0a8df25b0241518e
2023-11-01 09:33:21 +08:00
37feb7fbfa
ENH:selecting AMS slots with consisten materials
...
When there are multiple AMS slots, priority should be given to selecting the AMS slot that is consistent with the filament idx
JIRA:STUDIO-2564
Change-Id: I9aa208ba24f01ae20913f11c34a7f75a0a2581d5
2023-11-01 09:33:21 +08:00
743f485fad
NEW: [STUDIO-4036 STUDIO-4073] create filament and printer dialog
...
Jira: 4036 4073
Change-Id: I073ee4a2af4c86332e6d052f5d7322c9f2784184
(cherry picked from commit f4ec32929e1e6ebecd87e2e709636a43be497265)
2023-11-01 09:33:21 +08:00
131161f29b
NEW: support to display wired network for printer
...
JIRA: STUDIO-3519
Change-Id: I1c32254e249a3c0010973b17953121f4aa718f76
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:33:21 +08:00
efb227af03
ENH: [STUDIO-3151] Optimize scoring entry 2
...
Jira: 3151
Change-Id: I3a3a9d53f9557a93f02c44af3906b2e9f0761baf
2023-11-01 09:33:21 +08:00
ad9fa81b01
ENH: add a new support style "Tree Organic"
...
Add a new suport style "Tree Organic" from Prusa, as organic support is
faster and seems more strong in some cases. Thanks to Prusa.
Feature detection including sharp tail, small overhang, long cantilever,
are still kept.
Known issue: first layer support path may go outside build plate.
Jira: STUDIO-2358
Github: #2420
Change-Id: I4cec149bf4fa9eb733ae720ac1a7f65098e3b951
(cherry picked from commit d977bc5d3b4609f4fec0aa68152a33cacf184c4a)
2023-11-01 09:33:21 +08:00
b6995d8fb3
NEW: add spiral vase mode in plate config Jira: STUDIO-4127
...
Change-Id: I3bbcc1a165123ff81129e159ada1e00f23e38c68
2023-11-01 09:33:21 +08:00
c8cf950155
FIX:Access code and ip input and interaction logic
...
JIRA: STUDIO-3970
Change-Id: If7a33d6a70b09dda9f50d774d6cec732af923e71
2023-11-01 09:33:21 +08:00
66242d765a
ENH: set default environment to PRE
...
JIRA: STUDIO-4373
Change-Id: I1a02dcf3288aef22d690c40e2b900a89249b2f5f
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:33:21 +08:00
8407c409d9
FIX: crash when switch device page to cali page
...
Jira: 4358
Change-Id: Ic4d23bd7e31c7419516a3ab55a4d9a2e2072cd47
2023-11-01 09:33:21 +08:00
522cc9292f
ENH: update slice status after insert all custom gcode
...
Jira: STUDIO-4155
Change-Id: Ia088a471477895c92eaeac6f26052e7ec0f060a9
2023-11-01 09:33:21 +08:00
7b67686528
FIX: pa calibration default save value issue
...
should not use last input value as default saving value
Jira: STUDIO-3648
Change-Id: I8ea5bac66ef723c668c09ffb40b141a489e7d637
2023-11-01 09:33:21 +08:00
3c691ac086
ENH: improve auto-arranging's aligning to Y axis
...
Dominant direction is more accurate (solve the problem that cubes are
not arranged neatly).
Jira: STUDIO-4356
Change-Id: I8931f51a97bee96d5d9e75306481eae2e0cdc059
2023-11-01 09:33:21 +08:00
4c68a7634c
FIX: export notification encoding display issue
...
Jira: STUDIO-3807
Change-Id: If5a6651ba1f29ad35d6e11ed76f959b3d0864be6
2023-11-01 09:33:21 +08:00
09ed7ac18e
FIX: [STUDIO-4284] not set max height of liveview window
...
Change-Id: Ie00e6c30d37b0a308123c5f425ebeaf961000da8
Jira: STUDIO-4284,STUDIO-4258
2023-11-01 09:33:21 +08:00
280cad182b
FIX: [STUDIO-4074] reduce filament combobox update with ams
...
Change-Id: If7f914584012ee75f320d3a8a42e4823a370713e
Jira: STUDIO-4074
2023-11-01 09:33:21 +08:00
80e1b74703
ENH: Support: set the float air warning also to non-critical
...
JIRA: STUDIO-4217
Change-Id: Ic587acde0a566e4ea5217a5dc4f1ab8b6b155f5c
2023-11-01 09:33:21 +08:00
cd6dd8343b
ENH:updaite the target temperature for chamber
...
jira:[new]
Change-Id: Ifb16608b1de807bcecd58fbff9f64dea905c0b26
2023-11-01 09:33:21 +08:00
bf3974f6d0
ENH:update the style of the noise fan
...
jira:[STUDIO-4078]
Change-Id: Ibe42a25cc73010efac9d0d9d767153ec8090cb75
2023-11-01 09:33:21 +08:00
3cf99c7b34
FIX:fixed some issues with other languages
...
jira:[STUDIO-3721]
Change-Id: I236c194d2ce6d0f4c97d3b8283cac1a8de904266
2023-11-01 09:33:21 +08:00
e171425b3e
ENH:importing to studio will retry three times
...
jira:[STUDIO-4223]
Change-Id: If66faa4a21a414d43860ef8aa657562f5ee617b8
2023-11-01 09:33:21 +08:00
563b1255eb
FIX: add log for cali
...
Jira: XXXX
Change-Id: Ifce2d57d2694c5b39fec93529e6efffa036b8e68
2023-11-01 09:33:21 +08:00
855c3d61ff
FIX: tree support + raft may fail to slice
...
Do not skip generate_toolpaths if has no overhang but has raft.
Jira: STUDIO-4341
Change-Id: I0bdadb5f778e0e1fda686341c0860d0f0c160f0f
2023-11-01 09:33:21 +08:00
ae53c50098
FIX: slider show custom gcode issue
...
Jira: STUDIO-4316
Change-Id: I576e35861cd6306b67a0b5bd098eb2a739faf75b
2023-11-01 09:33:21 +08:00
453662647e
FIX: clone operation snapshot issue
...
Jira: STUDIO-4015
Change-Id: I6cecc67653ecf94bc550bb86f699f223fade4c4d
2023-11-01 09:33:21 +08:00
588723a854
FIX: report warning when uncheck timelapse for i3
...
Jira: 4338
Change-Id: Ia66676c25f2fa6a111e3e864a7b25989beaaf59b
2023-11-01 09:33:21 +08:00
3536cec1ea
ENH: fix collision of timelaps gcode when by object
...
Z height after timelaps gcode is changed. Should get
the new z height and save into gcode writer.
Jira: none, bug is found by self-test
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I25516def507782600f0f270a339c88ea01a472a3
2023-11-01 09:33:21 +08:00
9f83f6deff
ENH:Don't call the interface when task id is incorrect
...
JIRA:STUDIO-4322
Change-Id: I6fc1dc7379cba0702927e30cab0aa271074c59da
2023-11-01 09:33:21 +08:00
378a0a9d75
FIX:crash when close preference
...
JIRA: STUDIO-4340
Change-Id: I95b1c77720bf1264ca70f2fa3652e814d8f20e53
2023-11-01 09:33:21 +08:00
04ce14ca90
FIX: crash when support spacing set to 0
...
Jira: STUDIO-4339
Change-Id: Ic9198e21fbaa8992cc08628aefa8673ba82194b3
2023-11-01 09:33:21 +08:00
5160c8c4f6
FIX: brim generation with extruder overridding in by layer slicing
...
in brim generation, object's first layer extruders are obtained from regions.
If the extruders are changed at certain layers in by layer slicing mode,
the extruders from layer regions are not right.
this patch fix that issue by updating the extruder overridding in
a new member "object_first_layer_wall_extruders" in "print_object" class during
constructing "Tool_ordering" class. then using the new member directly when generating brim.
besides, support contour, which should be no_brim_area, is obtained from "support_infills" instead of "lslices" of "support_layers"
JIRA-ID: https://jira.bambooolab.com/browse/STUDIO-4332
Change-Id: I271d0ea0d8c01c412d4fb9ade5296c6a6471aed6
(cherry picked from commit 9919ce9d1b9105b859273eee4fe9481c4dff6189)
2023-11-01 09:33:21 +08:00
0eb9ac856b
ENH: use json to store filament & nozzle info
...
1.Use json to store nozzle hrc
2.Use json to store filament temp type
jira: STUDIO-3488
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8eb226e26352a41418f4e46d8cda403dc22ecff4
2023-11-01 09:33:21 +08:00
eb8cb63d88
NEW: generate small thumbnail size in 3mf
...
JIRA: STUDIO-4282
Change-Id: I2f6e35bd643e950d15dcfacb9f6ecae8f8bd80fa
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:33:21 +08:00
8d8b690adf
ENH: optimize exhaust fan param display
...
1.Optimize exhaust fan param display
2.Set max chamber temp to 60
jira:STUDIO-3518
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I0663803381f38f717554da4aefc61e02a8c1f37e
2023-11-01 09:33:21 +08:00
2509c9c90a
FIX:Translation of Calibration and Printing Popups
...
JIRA:STUDIO-4055
Change-Id: I570a53a7a6b18b323b42893c3ddc128bae7d0b94
2023-11-01 09:33:21 +08:00
bf6924de18
FIX: prefer local tunnel for P1P liveview
...
Change-Id: Ia4f52a8bd2b8bcf20740b2c7043e437d56a4a5b1
2023-11-01 09:33:21 +08:00
0db3fd9f81
ENH: [STUDIO-4034] add functions for custom printer/filament
...
Change-Id: I0fc2738392970b19c0ae8263ea7d968cc8f23c2f
JIRA: STUDIO-4034
(cherry picked from commit 30e5b3f61f2f5aae308d5e454f71d69939104ebb)
2023-11-01 09:33:21 +08:00
f4ffe8621b
ENH: [STUDIO-4005] support custom root preset
...
Change-Id: I0cf2142a2d3cee7269b53b73ad44e05934c2e9e6
Jira: STUDIO-4005
2023-11-01 09:33:21 +08:00
375932aea0
FIX:do not store empty use access codes
...
jira:[STUDIO-3776]
Change-Id: I660533ecbee25409967ab7b4df625d4a53451faf
2023-11-01 09:33:21 +08:00
34ee98f5ad
FIX: modify the default position of wipe tower
...
Jira: XXXX
Change-Id: I8c44ef6fbeba57eb14bd261ab09ee08429cddcaf
2023-11-01 09:33:21 +08:00
11b55ccd73
ENH: Added option for enabling interlocking between segmented regions
...
by the multimaterial painting.
This commit is cherry pick from Prusa, the commit number is
9bce0fcf9bb479c289c396e7e23ce95841a61628
Thanks to Prusa.
Jira: XXXX
Change-Id: I29ad1fa9ab3ccc393a1e2affde1ae869d0a33afa
2023-11-01 09:33:21 +08:00
dd7bfa21e9
ENH:disable combobox when sending file
...
jira:[STUDIO-3243]
Change-Id: I90aa7a639bf729dba462c957bdbda7ba4af08266
2023-11-01 09:33:21 +08:00
db6bfca564
NEW:Use new command for chamber temperature settings
...
jira:[STUDIO-4296]
Change-Id: Ic70a6f6dc412cde7f6d9d6361f8646df59df56b9
2023-11-01 09:33:21 +08:00
147b6beecb
FIX:fixed too many times requests for get_subtask
...
JIRA:STUDIO-4283
Change-Id: Ic15c782b8304d5fefbc78cc76fb32fa5ccf9335b
2023-11-01 09:33:21 +08:00
f88983f989
FIX: No progress bar is displayed during manual calibration
...
Jira: 3789
Change-Id: I4d56839136f4590b6df384f2287e9565e5e61afa
2023-11-01 09:33:21 +08:00
9c91341f6b
FIX: cali - The progress bar should not be displayed.
...
after the prompt box appears.
Jira: 4288
Change-Id: I97f2073847877dcfe98d4a6faa5b09cf257a5c7c
2023-11-01 09:33:21 +08:00
c1d1e6efbb
FIX: Incorrect exploded view after split to objects
...
and modify the incorrect assemble view after cut
Jira: 4182
Change-Id: I813a9179c54d544e745153186e09a4d82fc50dbc
2023-11-01 09:33:21 +08:00
e8f8a5d487
FIX: brim generation with raft
...
in previous codes, we generate brim for an object with raft, which do not need brim.
jira-ID: https://jira.bambooolab.com/browse/STUDIO-4238
Change-Id: I4b2c2c1c744c098cdcfdb03c2100b06a458e983a
(cherry picked from commit 0d06415d42c95e40f79a228f75827588171d410c)
2023-11-01 09:33:21 +08:00
0a991fa369
FIX: [STUDIO-4253] remove file exception in bbs_3mf
...
Change-Id: Ie585c4864239e7e25176fb316b5ed2e2249c9234
Jira: STUDIO-4253
2023-11-01 09:33:21 +08:00
ae67715eb5
FIX: [STUDIO-4305] fix crash when max-recent-proj is 0
...
Change-Id: I7f7ae9139e266667718b3275ada58fee63c627fa
Jira: STUDIO-4305
2023-11-01 09:33:21 +08:00
b281285a2d
NEW:[STUDIO-4016] Support motor noise cali for N1
...
Calibrated motor noise option, N1 supported.
And when none of the calibration options are selected, the start calibration button turns gray
Change-Id: I991034a13001f840016475171c33218ddc812d35
2023-11-01 09:33:21 +08:00
eb7f53d6c1
FIX: modify enforcer and blocker color
...
Jira: STUDIO-4304
Change-Id: I1d58d1b61929a831fc87f53ef364eb0d1af91c17
(cherry picked from commit 40022ec91a15f2663ce51948118fe2a5b716ecdf)
2023-11-01 09:33:21 +08:00
bcd8c90b4f
FIX:add new light for text shape
...
Jira: STUDIO-2623
Change-Id: I3a189154455040e8c2cb41ff8d8ac065661406ad
(cherry picked from commit 5854839c8f552b136cca6b3ff75605fa1e696fd0)
2023-11-01 09:33:21 +08:00
c631a69c32
FIX: coPoint type couldn't display
...
This causes the printer setting page unable to display becase I added a
coPoint type option best_object_pos.
Add reading and writing coPoint type configs solves the problem.
Jira: STUDIO-4303
Change-Id: I34e40e567236d28ab1a7be265128275191fcc935
2023-11-01 09:33:21 +08:00
28376584a3
NEW:[STUDIO-4012] support prompt sound
...
support modifying whether to turn on prompt sound from the print option pop-up window
Change-Id: I3206bfcefc9292dd2a7acb7294addc901ad21d4d
(cherry picked from commit ecc13666689d7f644ed3db36088b32b239728779)
2023-11-01 09:33:21 +08:00
44eaa75110
FIX:fixed studio crash caused by HTTP request blocking
...
jira:[STUDIO-3849]
Change-Id: I6348af96014e80da6b720da48239fed262f0f3c5
2023-11-01 09:33:21 +08:00
c144d4e7d6
FIX:fixed issue with calibration progress
...
jira:[STUDIO-3592]
Change-Id: I54ff7141169f8d1e33f2c1711d464ce5d04877c2
2023-11-01 09:33:21 +08:00
bc53eb23fc
ENH: modify tooltip in chamber temp
...
Also remove bed_temperature_difference in config
jira: STUDIO-4197
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id992bf0a6b5496038d513a6243b54c5232113515
2023-11-01 09:33:21 +08:00
3f1e15995f
FIX: auto-arranging made objects overlap with occluded region
...
finalAlign was not correct because the excluded regions are counted twice.
Jira: STUDIO-4259
Change-Id: Ie4ad167af8487ce7250b83d85f144ef01e60e00f
(cherry picked from commit 154de0d94ff34231a60966fb89cc14655cce8008)
2023-11-01 09:33:21 +08:00
b1d38928fc
FIX:clear calibration progress when switching printers
...
jira:[STUDIO-3407]
Change-Id: I5fcf6f9f6bd001a13c0f1e4b076334479ee98d45
2023-11-01 09:33:21 +08:00
b5e38cfe30
ENH:optimized display of German and Swedish
...
jira:[STUDIO-3722]
Change-Id: I4562b1d55c709a6aac56f91601b12ae3f3459fd1
2023-11-01 09:33:21 +08:00
668106cc5d
ENH: support traditional timelapse for i3 structure
...
Jira: 3935
Change-Id: I38a270f7d9060ea1b271c69fd0d427205817e705
2023-11-01 09:33:21 +08:00
7df99021c1
FIX: normal_matrix calculation lack transpose in overhang
...
Jira: STUDIO-4244
Change-Id: If706f098c43f15aa407dde68e8a914bd53ab7188
2023-11-01 09:33:21 +08:00
f942d5d55d
FIX: Text dragging of special file doesn't work
...
Jira: 4271
Change-Id: I0b2e33ac0cf4919bea93732151529deac3b7e9ed
2023-11-01 09:33:21 +08:00
6f1d04f270
ENH: support thumbnail in gcode for 3rd printers
...
Thanks @slynn1324
1. Add thumbnail size in printer params page
2. Optimize writing thumbnail data in gcode
jira:STUDIO-3942
Github: #2166
Github pull request: #2333
Change-Id: I6897cfddfa6a1b0c95decf67329a486d40ec0cc2
2023-11-01 09:33:21 +08:00
641a4fd1f2
ENH: add load_model_objects_and_custom_gcodes
...
Add cmd line option to pass layer change gcode.
This is useful for lithophane auto change colors.
Cmd: --custom-gcode custom_gcode_toolchange.json
Examples of the input json file can be found in the jira.
Jira: STUDIO-4070
Change-Id: I5beb5ff7d6d81028e95013e79f955e498cd3ba30
2023-11-01 09:11:19 +08:00
2a6bb02d60
FIX: CLI: fix the thumbnail color not correct issue
...
JIRA: MAK-1812
Change-Id: I61832ffeea75b9423d85ccd81d5602a3e7d288b8
2023-11-01 09:11:19 +08:00
e379d127d6
FIX: Crash when switch to the calibration page
...
after binding the printer in device page
jira: 4080
Change-Id: I8e712389bf619b177255111766c271cb9f1bf66e
2023-11-01 09:11:19 +08:00
4084702057
FIX: the default value of flow rate calibration is the last value set
...
Jira: 4147
Change-Id: If587d92aea872e8cfadb556b2912db402e0a6a86
2023-11-01 09:11:19 +08:00
142499871e
NEW: add best_object_pos for auto-arranging
...
For i3 printers, best object position may not be the bed center,
we need to align objects to the specified best_object_pos.
Jira: STUDIO-4133
Change-Id: I06e31e597d2dd8288eb24a52d836cc8a134a4111
2023-11-01 09:11:19 +08:00
c2f8993828
ENH: CLI: add support of rotate
...
JIRA: STUDIO-4183
Change-Id: I091cc3142ce867d2ac75ba27b3cb2e4e569c9681
2023-11-01 09:11:19 +08:00
5001a02409
FIX: CLI: fix the compiling issue under windows
...
JIRA: STUDIO-4217
Change-Id: Id937f921aa6d1f5cbc2300ba7395df71c3cd147a
2023-11-01 09:11:19 +08:00
642e82fccf
ENH:optimize the display logic of backup
...
jira:[STUDIO-4215]
Change-Id: I89436e88be64cfa9d6ff0c191a1539234917fd9b
2023-11-01 09:11:19 +08:00
a67eabbffb
FIX:fixed the issue with the N1 unload step error
...
jira:[STUDIO-4151]
Change-Id: If70cb59bc479a932e73904a2752522e56ddce884
2023-11-01 09:11:19 +08:00
3dfe33fbe1
ENH:optimize image config for different printers
...
jira:[STUDIO-4051]
Change-Id: Ibfcbc4c571a5c47eff95891e6f9079c3432e76a9
2023-11-01 09:11:19 +08:00
60333adc96
ENH: CLI: optimize the logic for message
...
1. treat the critical slicing warnings as error
2. save more information into result
including the triangle counts and the non-critical warnings
JIRA: STUDIO-4217
Change-Id: I25b746d06c9a1ef2d642c67852577982a2986322
2023-11-01 09:11:19 +08:00
76dda23702
FIX: add wipe tower for arrangement when timelapse_type is smooth
...
JIRA: STUDIO-4179
Change-Id: I45056a1b3d7316816b4919cd8185f914d6ad16f4
(cherry picked from commit bad658a228b3697ff1cbdbc45e038641cc5e3e24)
2023-11-01 09:11:19 +08:00
ca3a196ec6
ENH: notifications are expanded by default
...
Jira: STUDIO-4156
Change-Id: I9f1d95694b1725ecdf3973037b3df71d3a16fa98
2023-11-01 09:11:19 +08:00
8af1359868
FIX:Printing file name too long causes status panel display error
...
Jira: STUDIO-4031
Change-Id: I3e563a5ccf7b41732be81f80a86f21416aa1e8d2
2023-11-01 09:11:19 +08:00
791ad553fd
FIX:Can't Close Filament Windows
...
Jira: STUDIO-4103
Change-Id: I66194721ef62313765afa9e360d11f3b1fcaa981
2023-11-01 09:11:19 +08:00
a22fd80bf4
ENH: refine the logic of extruder_clearance_radius
...
1. use extruder_clearance_max_radius instead
2. set the value of P1P/P1S to the same value of X1C
JIRA: STUDIO-4214
Change-Id: I1ae5e4203db0933854b4388b5505dbf34b40edae
2023-11-01 09:11:19 +08:00
1266e1f19e
FIX:added icon for chamber temperature change
...
jira:[STUDIO-3902]
Change-Id: I699ae5025e80a2914276ee505bead9bac151f219
2023-11-01 09:11:19 +08:00
ddda60d479
ci: update network module based on commit 83a385c
...
Change-Id: I1c5fd418646d8387dc6437157f9c609cf3019eb2
(cherry picked from commit 95442e564b2c1b238a56230322463e3213eb43d4)
2023-11-01 09:11:19 +08:00
98a7a10ce5
ENH: get thumbnail from task info
...
JIRA: STUDIO-3975
Change-Id: Ic9ae120673098a4b62c4a00b515558fbef630890
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
fbd70b13a3
FIX: the ams control display the value of last time
...
when the filament is not recognized
Jira: 3831
Change-Id: I7f121e7ba8504a3a6de12227b3c7c032a452b62d
2023-11-01 09:11:19 +08:00
6ce7bc8c49
FIX: [STUDIO-3743] 3mf consistence correction
...
Jira: 3743
Change-Id: I65d868753c380d5399c743d101668ef013549a38
2023-11-01 09:11:19 +08:00
2a79af5729
NEW: add align_to_y_axis option for auto-arrange
...
1. Add align_to_y_axis option for auto-arrange.
This is useful for auto-arranging of i3 type printers.
2. Change default value of align_to_origin to true when switching
from non-i3 printers to i3 printers.
JIRA: STUDIO-2583
Change-Id: I7dabab846022a0da030a9fec060a60a4207537a0
(cherry picked from commit 9c549c18ecc1f513644e1bc4a60d6936721a13ac)
2023-11-01 09:11:19 +08:00
c7f07b668c
FIX: [STUDIO-4235] cancel web request on bind dialog
...
Change-Id: I27d50814e52812f6f551eb4ee2c90cdbaaaeb3c0
Jira: STUDIO-4235
2023-11-01 09:11:19 +08:00
664a4a76a0
FIX: [STUDIO-4122] PopupMenu from main frame
...
Change-Id: Iabf60abcd7039c29e18d8957b5dd695702cb9058
Jira: STUDIO-4122
2023-11-01 09:11:19 +08:00
ea8f299f6d
FIX: [STUDIO-4199] Show group in unsaved param dialog
...
Change-Id: Ibb3223fc46d31586c140cde31a8eabbb178d79a6
Jira: STUDIO-4199
2023-11-01 09:11:19 +08:00
d1ed562622
ENH: Revert "[STUDIO-3980] drag object accross plate in ObjectList"
...
This reverts commit 3c723583743938848db8392bddffc31ae7e68b6d.
Change-Id: Ie2500ede6c1839b88fd89666596a7d16957a2443
Jira: STUDIO-3980
2023-11-01 09:11:19 +08:00
24e672a0f1
FIX: [STUDIO-4228] clear cache data before require thumbnail of 3mf
...
Change-Id: I8cf60fa3b8a45a85311cddc5c508d88fcfdb41da
Jira: STUDIO-4228
2023-11-01 09:11:19 +08:00
b57557c746
FIX:fixed incomplete operation buttons
...
jira:[STUDIO-4119]
Change-Id: I73dd64fae9a42bfe248e6535d9cedb1343a2cc08
2023-11-01 09:11:19 +08:00
5c3102c241
ENH: show support_interface_bottom_layers in advanced mode
...
Jira: STUDIO-4236
Change-Id: I71a2d8c46e588651781728307bd56bbca0ba9e15
2023-11-01 09:11:19 +08:00
a401ad6045
FIX: do not show "Fill bed" option for unprintable objects
...
Jira: STUDIO-4169
Change-Id: Ia5bb727fa71b99553d0f7365aecf182b0f3cfc34
2023-11-01 09:11:19 +08:00
8bf9c7a5b4
FIX: CLI: fix the wipetower wrongly generated issue
...
JIRA: MAK-xxx
Change-Id: I6d6af58c7106df4dacb51e98dd607ff77c058c13
(cherry picked from commit 080c6ced15bf9eb6e490fbd3616667d66ecbff86)
2023-11-01 09:11:19 +08:00
630b458f2d
ENH: disable edit support chamber temp
...
jira:STUDIO-4230
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I4873badacc5d3947f56df1ea367481ddae748fff
2023-11-01 09:11:19 +08:00
9737cd5f36
FIX: optimize exhaust fan ui logic
...
1. Enable open support_activate_air_filtration
2. Fix display exhaust fan params when support_activate_air_filtration is closed
jira:STUDIO-4230
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ieddba4bb104b6068b5afb4c109ea6b90d7c4045b
2023-11-01 09:11:19 +08:00
9755a65289
FIX: CLI: fix the brim related issues
...
1. move the global functions to Model
2. set brim automation paremeters before process
JIRA: STUDIO-4208
Change-Id: I3f75175ec74d214ca2a6d5f3ade56d08e0ecd4f3
2023-11-01 09:11:19 +08:00
55453af689
FIX:displayed error file name
...
If the file name sent to the printer is changed to be too long, the final display format is incorrect
Jira:STUDIO-3137
Change-Id: Ia2a542a559ae8ff0343b159cff9e0317397e866f
2023-11-01 09:11:19 +08:00
7be9b591b8
ENH: CLI: add the re-arrange logic when the printer type change with different extruder_clearances
...
JIRA: STUDIO-4214
Change-Id: I6a8862b4da9812d38522fba2235d5e02f421878b
2023-11-01 09:11:19 +08:00
d13e18a238
FIX: the position of wipe tower is not default when new project
...
Jira: 4173
Change-Id: Icde5cac961eb225d2e703e8e87811b2940603126
2023-11-01 09:11:19 +08:00
4f48c48ad2
FIX: crash when multi-select connectors with different shape
...
Jira: 3916
Change-Id: Ic011827e5d301f91f684039a85b228196be1ba98
2023-11-01 09:11:19 +08:00
9a193fbfea
NEW:[STUDIO-4063] auto calculate flushing volumes
...
jira: STUDIO-4063
Change-Id: If8db1375bc8c17d4c86307c1c93a717f6c0df05a
2023-11-01 09:11:19 +08:00
042e6bf991
ENH: [STUDIO-4029] sync printer config with cloud
...
Change-Id: Icffee9d5987131e1d78d51ccfcafeefff18f26cb
Jira: STUDIO-4029
(cherry picked from commit 5b58e5f2658753efbf11037f0b6cbb023070c0ea)
2023-11-01 09:11:19 +08:00
11f0fb6016
NEW:add printer arch type
...
Change-Id: I4fedd3df960648d4ad1df32111431ccf126ef120
2023-11-01 09:11:19 +08:00
1453d196d8
ENH: add a device id parameter for hms wiki
...
JIRA: STUDIO-4177
different printer may have different hms wiki page
Change-Id: I0f4443580466ab1afc1fe16da6f5ed924e5d201d
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
5857025e8d
ENH: do not change ip when connection name is different
...
JIRA: STUDIO-4072
Change-Id: I6e72f894fa5eca91d5bbbfaca3e897be95c305e0
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
19ba3644ea
ENH:optimize the display of transparent materials
...
jira:STUDIO-3965
Change-Id: Ibedd88876796935e875f5d70680311b80cb460e4
2023-11-01 09:11:19 +08:00
6fa7ca2fd2
ENH:refine the title of dialog displayed
...
Change-Id: Icae618304064c9c30f2cf0a5eae98b6c8b6c1534
2023-11-01 09:11:19 +08:00
ab0f9d95fc
FIX:[STUDIO-3974] Model reset by plate center when machine switching
...
jira:STUDIO-3974
Change-Id: I44f5d238a5e7afffc24bbc4359c7ede226d24b4a
2023-11-01 09:11:19 +08:00
d9de09bba6
ENH: [STUDIO-4135] only sync user preset that need update
...
Change-Id: I9a1c0f9c34a5f5950beffa1c5e8f63c4cf7be6c6
2023-11-01 09:11:19 +08:00
dcb006535a
FIX: [STUDIO-4164] charset problem in load printer config
...
Change-Id: Id1ee5108b70e926f822ca4f12715bd2255e5c272
(cherry picked from commit 8ea1abc1df9d1d1680f20c4f9f423360b9318ceb)
2023-11-01 09:11:19 +08:00
ca32032654
FIX: [STUDIO-4207] fix tunnel mqtt not active
...
Change-Id: I561eb164256a7eb811d1daec84ad7907d3caa01d
Jira: STUDIO-4207
2023-11-01 09:11:19 +08:00
aaeebd7fe3
FIX: Upgrade the texture image
...
align texture image to the grid of the x1 machine
Jira:STUDIO-4206
Change-Id: I7dcc5061017f355f30b3f584180751ec7a3f391b
2023-11-01 09:11:19 +08:00
22d5ea002e
FIX: [STUDIO-4125] null crash in ImageGrid
...
Change-Id: Ibe2fcf6d3fe7ae901a2e594d782566a04aa19c39
Jira: STUDIO-4125
2023-11-01 09:11:19 +08:00
a05524417c
ENH: Add Ellis' pattern method for flow dynamic calibration
...
Github: #2356
Change-Id: I05068bd47fa8381429064ea0e5ba0f38e5da17c1
(cherry picked from commit c5d54d26e32909e1785cef9ba6a07d801419fa98)
2023-11-01 09:11:19 +08:00
f1362a7757
ENH: add the smooth pei bed type
...
smooth pei plate uses the same parameters as high temp plate
JIRA: STUDIO-4181
Change-Id: I9db8ca7440b5b205902fd4b35af6c24440e1104d
2023-11-01 09:11:19 +08:00
23079b23df
NEW:support for dynamic configuration files
...
Change-Id: Iec433ca1f75f223af68c5103013ff47d1acf1678
(cherry picked from commit 40acd7f6b11e9b2b3403a84b4b7d4b70da5d0ed2)
2023-11-01 09:11:19 +08:00
5e23f73866
ENH: add protection for chamber temperature
...
As title. Also add time for waiting chamber temp in printing time
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8054080d2e8821e421a6d03222b8b25365b5977f
2023-11-01 09:11:19 +08:00
7a439c523f
ENH: rename chamber_temperatures in placeholder
...
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Id4d853d479cfb9b6c3fda177891f11a34f7d29e8
2023-11-01 09:11:19 +08:00
bcc5450522
NEW:[STUDIO-4121] Search object list
...
jira：STUDIO-4121
Change-Id: Ib0777fc19b8fd70c92fa1169dd1df8cd27a04b3f
2023-11-01 09:11:19 +08:00
eb417083e0
FIX:[STUDIO-3565] icons grayed out unavailable
...
jira:STUDIO-3565
Change-Id: I7a005ab0d4f291ee664d37cc0f5a4890f848fa0d
2023-11-01 09:11:19 +08:00
5e2141f519
FIX:unit is English,sent to printer is still in grams
...
Under the preference settings, if the unit is selected in English, the displayed value in the send to printer pop-up will still be in grams
Jira:STUDIO-3726
Change-Id: Ida97f9f47caccd43d44e5310f9a55af60ad75822
2023-11-01 09:11:19 +08:00
e95b1b6ea7
FIX: [STUDIO-3886] cancel and join sync thread when app closing
...
Change-Id: I9d9efb24d31489b31e72b6bee0e0d67882b613b2
2023-11-01 09:11:19 +08:00
ab7dec0b87
ENH: Upgrade page optimization
...
implemented a click to jump to the browser, added a open in browser button, and skipped this version button,and download button
Jira:STUDIO-4042
Change-Id: I368a7eef0ac72c5b19cf8b03632112e183487c6e
2023-11-01 09:11:19 +08:00
2e6a3ea8b7
ENH: networking: update bambu_networking.hpp from master
...
JIRA: 0000(no jira), solving the compiling issue
Change-Id: I0c7a62ebb4bcbc137906996d314f5520c61621e6
2023-11-01 09:11:19 +08:00
90b906584d
FIX:fixed German not displaying error messages
...
jira:STUDIO-3722
Change-Id: I12883b4f494c1344a7b694ce627e95e4e14a3e1d
2023-11-01 09:11:19 +08:00
b73a91eae7
ENH:remove excess invalid text
...
Change-Id: I27600b2909b685bf90a924ff513ff8a6da39ff10
2023-11-01 09:11:19 +08:00
1e7f0d7fcd
FIX:fixed UI issues caused by Russian
...
jira:[STUDIO-4024]
Change-Id: Ib636a348917a88821cd9bcbbb64d847ae316ca0f
2023-11-01 09:11:19 +08:00
59f0b580a3
FIX: cancel grid undo/redo function
...
Jira: STUDIO-4150
Change-Id: I854a1ef2a5fade8e5702fc6e2e31c98ff2207eea
2023-11-01 09:11:19 +08:00
7b33a7e86b
ENH: fix conner case of sandwich wall order
...
Updated sandwich mode code to cater for edge case where two sets of internal perimeters were causing the perimeters of another island to not be re-ordered correctly.
Github pull request: #2182
Change-Id: Ib58722db8cb76aa6b6474412c71993bb8e4dc007
2023-11-01 09:11:19 +08:00
9bf251c54c
ENH: add printer structure in code
...
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I57c24a0ea977b510932970817d67570ab3fe7bc4
(cherry picked from commit 409f03de471f65b9edf5c733b691e280c18c19cc)
2023-11-01 09:11:19 +08:00
4ac098df4d
ENH: reorder wall seq for inner outer inner mode
...
Enhancement on wall ordering for inner outer inner mode
Github pull request: #2182
Change-Id: I0902ea0c728f7e37a1a43f9796997f33d37a9940
2023-11-01 09:11:19 +08:00
c553844b05
FIX: sort m_extruder_option_keys lexicographically.
...
Github: #77
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I8832a3848231da8b1066688a2471acd6b6122c19
2023-11-01 09:11:19 +08:00
eaca2bd0ed
ENH:delete U0 firmware functions
...
Change-Id: I6a65f41224e346023989bd1f097d4bf1b069f907
2023-11-01 09:11:19 +08:00
4a143ed8b1
NEW: add bottom setting for height range function
...
Change-Id: I0a818dde1e44e9f4475222038916c5ef992461de
2023-11-01 09:11:19 +08:00
ee478072c8
ENH:image to base64&supports uppercase file names
...
the issue occurs when trying to convert an image with uppercase file names to base64 format.
Change-Id: I1b3b4b95ae5602affc7c2d7c584fdc459d90ee0d
2023-11-01 09:11:19 +08:00
54d5e9df8f
FIX:fixed some unsupported HMS messages that cannot be displayed
...
Change-Id: Ib5acffb1e2c94bae56aed89fbb71a7a15a660485
2023-11-01 09:11:19 +08:00
46a48539bb
FIX:block HTTP links&open in default browser
...
fixed:https://jira.bambooolab.com/browse/STUDIO-3030
Block web page redirect requests and open them in the default browser
Change-Id: Ie79f8259859fa6ba158f31710179a8c7c53d6fa4
2023-11-01 09:11:19 +08:00
297e4d1373
FIX:fixed send button refresh too many times
...
Change-Id: Ifb0b9e4d2e6ed7997ba7f033d555ea3aeec9fa9c
2023-11-01 09:11:19 +08:00
ae7a9303b8
ENH:no longer using config that support_virtual_tray
...
Change-Id: If578b66de609e5703bc6e912c744f10becaaebed
2023-11-01 09:11:19 +08:00
23dc1ec960
ENH:dynamic display of AUX fan
...
Change-Id: Ib2b5578567eaa6fde15fdb54bdf24063b627d2d7
2023-11-01 09:11:19 +08:00
7a7a9f4296
ENH: add top_area_threshold param
...
Jira: 4136
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ic8a3d05cea769ae92dd5f2f2fcd685d660075c95
2023-11-01 09:11:19 +08:00
022445b272
NEW:supports new layout of extra AMS
...
Change-Id: Ib00d7c2e1c09a2fbe2de739e1c7cc35e03900edc
2023-11-01 09:11:19 +08:00
a980b78172
NEW: Z hop restriction
...
Z hop will only come into effect when it is between retract_lift_above and retract_lift_below.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: If43aea7024018eb8f532c6af5d8000973f2edee3
2023-11-01 09:11:19 +08:00
d78bb9e1f4
FIX: short edge collapse algortihm
...
so that it does not decimate all triangles on very high detailed models
Relevant issue 8834 Access Error when slicing
Github: #2283
Change-Id: I047361c88c561962ef4d3cf67bc0126402c41941
2023-11-01 09:11:19 +08:00
86675c4caf
ENH: [STUDIO-3151] Optimize scoring entry
...
Jira: STUDIO-3151
Change-Id: I6ffd236faea7de9f1e35b77f818f926f2477939a
2023-11-01 09:11:19 +08:00
91cdfbf286
FIX: [github #2209 #2246 ] reload from disk not work
...
Github: #2209 #2246
Change-Id: I12ab1e08eaeff334315136914f0c20cc2c78fd98
2023-11-01 09:11:19 +08:00
342b8d7338
FIX: CLI: fix some issues
...
1. JIRA: MAK-1727, color of thumbnail not correct
2. JIRA: MAK-1723, model upload outside issue
Change-Id: I1754d730021c9df8044248e931023899d410d8de
2023-11-01 09:11:19 +08:00
981a46920f
FIX: the position of wipe tower is nor correct when multi-plate
...
Change-Id: Idabea67591102ee0f4595793e1ab027e805ace7a
2023-11-01 09:11:19 +08:00
8355bc949f
ENH: [STUDIO-3892] different app config dirs for internal/beta
...
Change-Id: Ibd771b948f9a0b8e95b87c8d7244ab5728b6f4a8
2023-11-01 09:11:19 +08:00
94f26da614
ENH: [STUDIO-3980] drag object accross plate in ObjectList
...
Change-Id: Iee3193a8e0eaea67670a55e023fe64adca7a8695
2023-11-01 09:11:19 +08:00
5076a3008a
NEW: insert Gcode between objects
...
Change-Id: Iec3535941390bfbd279a5677c352d92f36506d4c
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
(cherry picked from commit e0c5476e2e4c02055fb6ce7b4b4d927498c6ee90)
2023-11-01 09:11:19 +08:00
163ff38c3b
ENH: [STUDIO-3895] enable mac window menu
...
Change-Id: Icd53c6866e9108f960aa52e54e518efc5def7101
2023-11-01 09:11:19 +08:00
3c01e937f8
ENH: [STUDIO-4028] RequestUserAttention on printer error
...
Change-Id: I37f451edcd57059320103093291c6037129a2898
2023-11-01 09:11:19 +08:00
11fb86a054
FIX: [STUDIO-3891] not remove unselected config bundles
...
Change-Id: Ibab65c289b3d0900650b93bf6e9789c271dd3db2
2023-11-01 09:11:19 +08:00
e78812dac4
ENH:Supplement to printing status supplement
...
Change-Id: I116e84705b390b99f8646b64eb7e96ae4c35c7d3
2023-11-01 09:11:19 +08:00
faeb95d59d
ENH: smooth 6 times by 1 click of "smooth" button
...
In adaptive layer height, smoothing 1 time is not usable.
There'll be layer lines at the layer height change boundaries.
Change-Id: I84a8b69744db4936062d631864836f0a8cd99cf6
(cherry picked from commit ca77408f38c9a57bee4ab8ee4989024f7f105317)
2023-11-01 09:11:19 +08:00
4e15942ba8
FIX: differnt_support_interface_filament was wrong
...
This bug will cause a gap between support base and interface in Snug mode.
Jira: STUDIO-4067
Change-Id: Ife4d1fc3652803e9d41bb49fddf126cb05798ae5
2023-11-01 09:11:19 +08:00
7e70e071e9
FIX: loading stl with NaN points crashes
...
Avoid loading NaN points.
Jira: STUDIO-3889
Change-Id: I8c00f24e0ae1ba3b637e5d9bb13de93b1b4e77ba
(cherry picked from commit 0d244c7f65b913922ca4fad59d93fd80725f2e49)
2023-11-01 09:11:19 +08:00
c8651b43f1
FIX: CLI: fix a wipe tower position issue
...
when arrange failed and restore to original
we will compute the position of wipe tower again
we should skip this case
JIRA: STUDIO-4048
Change-Id: I19edc36dfa7ec5a9f6b5ba3a1c1e0767361b3e33
2023-11-01 09:11:19 +08:00
5c59b0721f
ENH: [STUDIO-4062] print status supplement
...
Change-Id: I298d4fcfda51b48c90c62936185efc1a6bf459f0
2023-11-01 09:11:19 +08:00
b94dee2460
ENH: CLI: add a flag to allow minimum size save
...
JIRA: STUDIO-3752
Change-Id: I0277c34d108185d10130630a72811122f8ee9ae2
2023-11-01 09:11:19 +08:00
6ae7228f9e
FIX: CLI: fix serveral issues of CLI
...
1. duplicate id issue, MAK-1702
2. shrink issue, STUDIO-4048
Change-Id: Ie952f1ecc5267a60f0ce3220c4a5ea31cf7199ff
2023-11-01 09:11:19 +08:00
d724a3bd66
FIX: use extruder list to decide chamber temp
...
As title.Use the same way to decide exhaust fan.
Removes end print exhaust fan control.
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ib848b04361dc1214eabe2819a6d120d9e0646689
(cherry picked from commit 02ef3a05141710172b1ec2cc45c1e3f9908c82a3)
2023-11-01 09:11:19 +08:00
977ae079c8
ENH: add support for chamber_temp and exhaust_fan
...
Support controlling chamebr temperature and exhaust fan for air filtration
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I31627ce4f8acce99e132b0436ab7dcd0bcebf81d
(cherry picked from commit 215878864e1410085ddf9735595e1b1cb00c1e47)
2023-11-01 09:11:19 +08:00
4121960292
FIX: allow changing ironing angle.
...
allow changing the relative angle between the top surface and the ironing.
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I85e8ff3d05d3a6d9408da011631e7d71a6d85178
2023-11-01 09:11:19 +08:00
4fce50453c
FIX: no soild ironing if top or bottom shell is 0
...
fix the ironing be apply to the preview layer of bridge
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I53cb4e6ff80176953c2927c1d9dc5eecc590764c
2023-11-01 09:11:19 +08:00
6b5ba84075
ENH: [STUDIO-4029] ipcam compatible remake
...
Change-Id: Ic6cda7daa6a4e3b03fe645d8ae60f1e68a2c3864
2023-11-01 09:11:19 +08:00
5ba829337c
ENH: [STUDIO-4029] apply new device compatible settings
...
Change-Id: Ic807c747d77ccbe99b3b157c2e6d3e3a2945e1ac
2023-11-01 09:11:19 +08:00
13857dba34
FIX: modify the default position of wipe tower
...
Change-Id: I27eacb73a7e32d20416da785378d3ff0c31f5c23
2023-11-01 09:11:19 +08:00
9560a292f2
FIX:check if the printer and preset are the same
...
jira:[STUDIO-4018]
Change-Id: I69ea1e3f8e8214ae68464665e1e7260fcc41dd82
2023-11-01 09:11:19 +08:00
ba3638e70e
NEW: allow changing the angle of ironing in the dep mode.
...
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
Change-Id: I09348096fd19ee4e07ce3a04ae152f7ee5758767
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
2023-11-01 09:11:19 +08:00
edcdad162e
FIX: tree support bottom interface layers were not correct
...
The bottom interface layers were not right when "independent support layer height" is enabled.
This commit ensures there are always 2 bottom interface layers and the gap
is not less than specified. However, the gap may be slightly larger.
Jira: STUDIO-3842, STUDIO-2138
Github: #2127
Change-Id: Ifd8fbc4c7bc6dd92f2534fdd0179458a9e93c79a
2023-11-01 09:11:19 +08:00
9f88906587
FIX: remove Tolerance test and modify wiki link for mac
...
Change-Id: Ieca66b0226eef692191e9e7bed56e54dc9d7b40c
2023-11-01 09:11:19 +08:00
a6ab8314a4
FIX: modify title text Jira: STUDIO-4007
...
Change-Id: I1826f72ba8e09b22481aa096fd5c1f881410d08d
2023-11-01 09:11:19 +08:00
6f8005c306
FIX: improve brightness for the slice of black model
...
jira:https://jira.bambooolab.com/browse/STUDIO-3992
Change-Id: Ib25112af68bb9a86b13f9b0c6f4a8229e6d2a15f
2023-11-01 09:11:19 +08:00
f7495612fa
FIX: add small disc stl
...
Change-Id: I5c6c8ca1d4a15fc1462fe47d2e5e37b459f9a9a6
2023-11-01 09:11:19 +08:00
5d254cd0bd
FIX: Flow Rate Calibration Pattern too crowded with 0.8mm nozzle
...
github issue 2296
Change-Id: Iee766680c26ab5ca826961f53f8963d802a25397
2023-11-01 09:11:19 +08:00
21abdb24da
FIX: replace ',' with '.' when using minor languages
...
Change-Id: I992f4c702141f89860625f64d9524ee1c0445cee
2023-11-01 09:11:19 +08:00
58a5db2607
FIX: config: update config with correct logic
...
1. remove other vendors
2. set the version to correct one
jira: STUDIO-4009
Change-Id: I804bb1d08a9d241bc323a22b0d3fb40f7c9c3c9a
2023-11-01 09:11:19 +08:00
ecaa5fa2e6
FIX: CLI: add logic to allow use cached_data while printer size change
...
when print profile created on small printers
the cached data should also be used
JIRA: MAK-1658
Change-Id: I31e801bd3116838baaeaef44f4aa6d53d65aa058
2023-11-01 09:11:19 +08:00
f87996960d
FIX: [github 2259] Maintain development mode when reopening BBS
...
Change-Id: I9cd6bddbc58f7841499665e21dc606b35c706afc
2023-11-01 09:11:19 +08:00
c0a247994c
NEW: Add Ellis' pattern method for pressure advance calibration
...
Add a new calibration pattern method for pressure advance calibration, which can better test the influence of k value on the corner. The changes of this patch are picked from OrcaSlicer by thewildmage, thanks to thewildmage for the great work!
github issue: https://github.com/bambulab/BambuStudio/issues/2222
Change-Id: Icc8fd4d52b20c1668bfa08716b48549dfada515b
(cherry picked from commit eb72d8b681bef270906406a2d10a36d4efbce900)
2023-11-01 09:11:19 +08:00
e7bd5b9bb9
FIX: missing include url.h in WebViewDialog
...
Change-Id: Ib463a80ab9d5002c52fe5718254f6c91a6cd168b
2023-11-01 09:11:19 +08:00
780d9a7e93
FIX: add cursor and enter processing for plate name
...
github:https://github.com/bambulab/BambuStudio/issues/2262#event-10081065971
jira:https://jira.bambooolab.com/browse/STUDIO-3992
Change-Id: Ie6120a8ff99f9568f9e42800429a1c5b378fc28f
(cherry picked from commit dbfc17943fa912470f26de1615088c87bd022b4e)
2023-11-01 09:11:19 +08:00
cb38b71825
FIX: should consider plate offset in wipe tower
...
Updating position to gcode writer in wipe tower
miss plate offset.
This is handling for github issue #2256
github: github issue #2256
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I915591ee919d10bb5bd2c2dcd5f1e98fd4b66503
2023-11-01 09:11:19 +08:00
2a996d40b6
FIX: [github 2246 2209] reload form disk not working
...
Change-Id: If70d7b700c454e9290741980afb0a1fd73a1fa5a
2023-11-01 09:11:19 +08:00
d8b56977b9
FIX: STUDIO-3745 open gcode.3mf, unable export to file
...
Change-Id: Ib8a45cb38f28438ecc4d2a772f1437dbd324078a
2023-11-01 09:11:19 +08:00
5eba42b565
FIX: use current_language_code_safe() for valid language
...
Change-Id: I480730055588aa76bd40f35e6c4bcbe9833c330d
2023-11-01 09:11:19 +08:00
af534509b3
FIX: meshboolean set transformation matrix twice
...
Change-Id: I1428c66f69bbd14fa0485bab23b0a26b8e7b6dba
2023-11-01 09:11:19 +08:00
9b980c9bc6
FIX: The cancel button should not make plate name valid
...
Change-Id: Id2b3935e87d443f5a594fdd588a63e502c0321e5
2023-11-01 09:11:19 +08:00
060b41707e
NEW: first layer printing sequence
...
Change-Id: I19e39a27cf972eb859e51a334aeae8f57ee263f8
2023-11-01 09:11:19 +08:00
a75d024485
NEW: support korean and russian language
...
Change-Id: Ie29a6304906415e2e71f0dc8ee99ffc65b1a1708
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
93cf701be5
FIX: [Jira:3864&3728 github:2227] translation issue
...
Change-Id: I375e72191b3af1cf389e65ff4b62ed4f77d8f76a
2023-11-01 09:11:19 +08:00
e7598e6406
ENH: [STUDIO-3911] web view drag drop on macOS
...
Change-Id: I92e7f6135152e4bfaf7f7342cdff1ea2e269c5a5
(cherry picked from commit 3452e6edebeecf499d44798ff6b85425ab244cb4)
2023-11-01 09:11:19 +08:00
d30470d603
ENH: [STUDIO-3911] load as model file when drag to home page
...
Change-Id: I1d8986ca4984fea418371f253a48a9593bb9b1af
(cherry picked from commit 685edaa145cd4b4ce4afce00ae81d78305f84e84)
2023-11-01 09:11:19 +08:00
dee1c04f28
FIX: load from gcode stream crash with null model pointer
...
Change-Id: I09a17dd5726d164a4e0bc1d5f213581832a17a5d
2023-11-01 09:11:19 +08:00
a9e436e557
FIX: [STUDIO-3735] unload default user filament/process presets
...
Change-Id: I24e54823e91ea8f6cad9bfbdf69ee838e75f8190
2023-11-01 09:11:19 +08:00
163d279851
FIX: [STUDIO-3891] check config update after sync
...
Change-Id: I82e409f0d3649a371cbe0f8ee9a5f9ad1a267fc8
2023-11-01 09:11:19 +08:00
ed82262ca8
FIX: [STUDIO-3736] show download failed dialog & cancel task
...
Change-Id: I25830b29ffaaced26fcee8290ccfcce590e3963a
2023-11-01 09:11:19 +08:00
0cd8d5cd78
FIX: input ip dialog not show for liveview
...
Change-Id: I422b89eae3c9b9049416f2460bacb4cc991ca605
2023-11-01 09:11:19 +08:00
fd89e4c256
FIX: remove N1 setting and auto match textures based on printing area
...
Change-Id: Ia208c7436901a722c8c4e2caa3d7573fd0714432
2023-11-01 09:11:19 +08:00
771bc38a02
ENH:support setting chamber temperature
...
Change-Id: Icacd3f248a8f4dbff6c928e666f986c62801eebd
2023-11-01 09:11:19 +08:00
403c5e825d
ENH: modify device upgrade page
...
Change-Id: I16c91c6e7b9c4c44307425e343b260ed873a695d
2023-11-01 09:11:19 +08:00
c414c66d73
FIX: entering save page likely to crash
...
Change-Id: I50130e8c75bdeb82a347621250842e8f55fe24b1
2023-11-01 09:11:19 +08:00
22aca74e5b
ENH: remove the single filament limitation of skipping object
...
We planed to skip uncessary filament changing when skip
object. However, this caused color mixing.
If we try to fix the color mixing issue, the flush gcode
should be generated by printer itself. This is not a short
time job.
So currently we never skip changing filament when skip
object. This will not save much time and flushing. But better
than none.
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I6046cd2765cf68058712b4256402acc0be771144
2023-11-01 09:11:19 +08:00
d5120f890e
FIX: crash when use manual flow rate
...
fix the PA tower is effect
Change-Id: Idc00090c75023d62beca2a32529a6749081de9ef
2023-11-01 09:11:19 +08:00
fdbe35b619
ENH: add placeholder first_layer_center_no_wipe_tower
...
This placeholder can be used for smooth timelapse of i3 type printers.
Change-Id: I953a437a7733835d850812565ff5f31b83292912
2023-11-01 09:11:19 +08:00
0167baee89
ENH: add shortcut key of clone
...
Change-Id: I63a570ac05695d6cd1e36293f7ca9858d9f7f358
2023-11-01 09:11:19 +08:00
e88550b206
FIX: unify cli and GUI auto-arrange
...
Make sure cli uses same params as GUI's auto-arrange.
Previously cli uses wrong skirt_distance.
Jira: BLPIOT-255
Change-Id: Iaccfb76acf7413ec614fff006feb770dcd6783cf
2023-11-01 09:11:19 +08:00
473ebbdc18
FIX: Re-multicolor slice when change first_layer_print_sequence
...
Change-Id: If17708744a52c95aec406e2cd46a29ff4cf29872
(cherry picked from commit 892f508f194e49462a2c470ce8d0f3f6313a0c09)
2023-11-01 09:11:19 +08:00
476ca19689
ENH: support custom the first layer print sequence
...
Change-Id: I0516948292933fe47d39fb3ae2f7e91473b45b3a
(cherry picked from commit 5bbdb28c86509d5f94b5b9c33a0f2e1b2749e94b)
2023-11-01 09:11:19 +08:00
3f53791200
FIX:The blank page appeared when clicking to log in
...
Change-Id: I0f6904c85da5f72fa9d4c0be0e8174acdf44cc8c
2023-11-01 09:11:19 +08:00
25f9cccf2a
FIX: disordered support interfaces in tree support
...
Can't delete nodes with no children, otherwise the parent-child relations may be corrupted.
Jira: STUDIO-3737, MAK-1557
Change-Id: I1de39e182bac4a55a8739c00e59fdf7b9b5e4dfb
2023-11-01 09:11:19 +08:00
9fde7861c4
FIX: Bugfix for zero-width tree supports from @scottmudge ( #1367 )
...
fix bug with zero width tree supports throwing exception.
This a PR from @scottmudge commited to OrcaSlicer.
More than the original commit, we also unify the usage of line_width and
support_extrusion_width, making things simpler.
Change-Id: I0b7a4344cbda4fdf05dfd9f8965f598ad6844429
2023-11-01 09:11:19 +08:00
ef805f0c5a
FIX: change the max length of plate name from 40 to 250
...
from github user:https://github.com/bambulab/BambuStudio/issues/2119#event-10014273957
Change-Id: I3db2db78f7c870864123789d8ac5eadc31702944
2023-11-01 09:11:19 +08:00
a549553960
ENH: [STUDIO-3893] edit plate name in object list
...
Change-Id: I2dd704c50f684bedac7958d4a133edbda5522382
2023-11-01 09:11:19 +08:00
8e10ec039f
FIX: Prompt dialog box for optimizing studio versions below 3mf
...
Change-Id: I6df693f31d25f023c2dc4c1f0a5ec27e70e105f7
2023-11-01 09:11:19 +08:00
b09601777e
FIX: log device version for media connect
...
Change-Id: I0eada63e3d8e25840a221263beac5a9104f43d0f
2023-11-01 09:11:19 +08:00
fb528c67b7
FIX:fixed download progress starting from 1%
...
Change-Id: I9b073e6fa1698f5ac02827d30e883f585ca68674
2023-11-01 09:11:19 +08:00
74fc252dcf
FIX: exchange the position of the restore button with ComboBox
...
Change-Id: I2f7b25883110508d1c6f478ecac86d4a92ed8548
2023-11-01 09:11:19 +08:00
08ce9fe662
ENH: add more print stage values
...
Change-Id: I098eb4bae14cbfd44af2dea7fb108bbc07d47407
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
87e8c64cb0
FIX: [STUDIO-3892] warn bambu source dll from another install
...
Change-Id: I23ae1b93d99035135786a6f40321475ea6c1c373
2023-11-01 09:11:19 +08:00
7a3dcda2a2
FIX: avoid the bug in wxControl::Ellipsize api
...
exist a bug where the last bit of Ellipsize api in the wxwidgets is an out of bounds array with the '&' symbol.
Change-Id: Ie54f7958195815bd9b028f86284cc5da582cee8a
2023-11-01 09:11:19 +08:00
47db82ee1e
FIX:Preference page scrolling issue
...
Change-Id: Ia885b083a7467f3558a940b808f071d9ca80e531
2023-11-01 09:11:19 +08:00
33a8545e2b
ENH: update ota version after get_version
...
Change-Id: If04f1071084891c2ba13a5c3f10ac427dea6abf0
2023-11-01 09:11:19 +08:00
536bdeda54
FIX: Revert overhang optimization
...
Revert overhang degrre split
This reverts commit 7d8c98117ae6b7c2c2d62176d1bf8cf51b28a79b.
Revert "ENH: arachne overhang efficiency optimization"
This reverts commit 7adcceda95fc52be4a37c3e74de1aa776a3c434a.
Change-Id: Ic33a2e8bb11e48b40388706a662267e05508fd25
2023-11-01 09:11:19 +08:00
5efc5ba6ea
FIX: CLI: fix serveral bugs
...
1. bed index not correct issue
2. pick thumbnail not correct when repetitions
Change-Id: Ie846432e29c596f95da30c7df199c252873504f3
2023-11-01 09:11:19 +08:00
8ee88c81c2
ENH: fix arachne wall order
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0f3680ba73689c6fb673c070b0355a84fc25de26
2023-11-01 09:11:19 +08:00
ade248cc2f
FIX: tree support's enforcers inside a hole were wrong
...
Previously holes of enforcer_polygons was taken as contours,
which caused enforcers inside a hole were too large.
Jira: STUDIO-3877
Change-Id: If38c34e2469b822012a2ed0b082783563fe99228
2023-11-01 09:11:19 +08:00
ade460d6b1
FIX: crash at flow rate cali save when input Chinese
...
Change-Id: Idfc913e79c13646c9536c8d331c216acdb1e2ef5
2023-11-01 09:11:19 +08:00
4d438c6eba
FIX: translation
...
Change-Id: I4e6ce9943df178c80a47c49fb50da1ba16d1d7a3
2023-11-01 09:11:19 +08:00
307a888597
ENH: key name-only one wall on top surface
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ife706b02d51badddc7e6dcba446a4d049695a706
2023-11-01 09:11:19 +08:00
f66f4b5462
ENH: fix overhang degree split
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I81b946f2fab5e561f965df2ab9852c10c61f8480
2023-11-01 09:11:19 +08:00
bc34f9e223
FIX:fixed sending print failure due to long plate name
...
Change-Id: I89f32f7d7f214d55051e736f834e0e49d7c808ab
2023-11-01 09:11:19 +08:00
0d837e2587
ENH: top one wall for arachne
...
split to 3 mode
not apply
all top surface
topmost surface
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Id9bb1a6ded7414b2f093ac01e4ecb4b93057d022
2023-11-01 09:11:19 +08:00
287547132f
FIX: remove_invisible_ascii
...
Change-Id: I5d9b2dcf21b5ba2842b27da6603a0ac4365545ff
2023-11-01 09:11:19 +08:00
9f18c886c9
FIX: add Chinese pictures in cali page
...
Change-Id: Ibcb0a01ec0fcbb3a73708cb6dc771748b3ebc2ea
2023-11-01 09:11:19 +08:00
aa96aba89d
FIX: display failed when the flow rate is 0 or too large
...
Change-Id: I20af5b0badba63a12129fb571524a152b591d974
2023-11-01 09:11:19 +08:00
3aefe96f26
FIX: [STUDIO-3835] Cali translations
...
Change-Id: I705d27ff172c8c9c0eed617f69af3128f2e3ffe0
2023-11-01 09:11:19 +08:00
eee9f9dc13
FIX: cali related encoding problem
...
Change-Id: Ia79237d9e2f37fd8720411891fb724c3bd00b9fb
2023-11-01 09:11:19 +08:00
3d52954374
FIX: the n value is not correct when set pa cali value
...
If it is manual, set it to 0, if it is automatic, use the calibrated value
Change-Id: I7c8737366e0ec0c6c2c17a7ad905cfb34e236fd8
(cherry picked from commit b235b0c8b79b1baf6a393ccfea236e1e650dcb7d)
2023-11-01 09:11:19 +08:00
c5ea3c8b71
FIX: fedora: cannot select preview plate thumbnail
...
Change-Id: I1bb774f7f48a7b905498d5c1cc06263aa3b01ce9
2023-11-01 09:11:19 +08:00
7c905f93c3
ENH: CLI: add time record for prepare/slice/export
...
Change-Id: I4004a9af3823223c885f428f5a2f180f9d9074e5
2023-11-01 09:11:19 +08:00
c47d9bbaf5
FIX:fixed issue of not displaying load/unload entries
...
Change-Id: I6e264de950f194a93055c4120a025ce37d1e2b15
2023-11-01 09:11:19 +08:00
8c8235c1c9
ENH:fixed display the wrong tray type in AMS
...
1. no longer using track_type
2. type using tray_info_idx query
Change-Id: I3ad08dc92e90c86041232d57b80331c563fe24c5
2023-11-01 09:11:19 +08:00
f6d5e5bdea
FIX: cali: manage result crash
...
1. fix input chinese on editing name will crash
2. fix: repeat editing action before the whole dialog is refreshed, will crash
Change-Id: Ia5f785987aec547007a1d71e1af770b606b50d65
2023-11-01 09:11:19 +08:00
94b4194b11
ENH: arachne overhang efficiency optimization
...
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I9b0954e24867b5f4a29e0e5d24708cd977ec22aa
2023-11-01 09:11:19 +08:00
ebf9c19e65
ENH: remove check link state
...
Change-Id: Iba16694299f92a89e63ea9c4829e3087a29bade1
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
ddb20e0b13
ENH: CLI: add more logic to support repetitions
...
1. add identify_id for those clone objects
2. ensure succuss when copy multiple objects
Change-Id: I8a92f485442577ce70b1f5c46449dae1ae07b713
2023-11-01 09:11:19 +08:00
77cf8a1e55
ENH: Allow users to adjust the order of components in assemble
...
Change-Id: Ie4b979e4cfdf99d822801400cd6b54773f526d7a
2023-11-01 09:11:19 +08:00
639bf63af5
FIX: filament painting doesnt work properly #2078
...
STUDIO-3731
Change-Id: Ifc93baf194d5e81eb7e00facf85344bfc05878fc
2023-11-01 09:11:19 +08:00
c522ed8ec0
FIX: calculation error in overhang area
...
bug: There is a part of the overhang area in the model that cannot be applied
Change-Id: Ia1045225776ccb0e8730912aae1d4c7509f40c5b
(cherry picked from commit daa3e131564690e9e169313d147fd84537b898ca)
2023-11-01 09:11:19 +08:00
19f6fec6c4
ENH: close logging in console of libcurl
...
Change-Id: I434f733a66ee79af762cfc2e52c28aba0e192d97
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-11-01 09:11:19 +08:00
c31ff2d43c
ENH: CLI: support system preset passed to CLI
...
Change-Id: I933d49e677c8610c3fe90bbe7d455f94d950ae96
2023-11-01 09:11:19 +08:00
d980aba29d
FIX: [STUDIO-3531] Differentiation of Memory Exhaustion
...
Change-Id: I009b78f1f3d4339745e44208f10b91083efaf744
2023-11-01 09:11:19 +08:00
bb17fdea9c
ENH:adjusting the style of printing options
...
Change-Id: I9a9bb554cc21d24797e5ebdb8ea33c39838d3e90
2023-11-01 09:11:19 +08:00
448e3b8a8b
FIX: handle printer file downalod failure
...
Change-Id: I1e8cbf4a6d4081270ed78bf7d1471eb1d6114a0b
2023-11-01 09:11:19 +08:00
5a0f9ff4f0
FIX: default thumbnail type jpeg
...
Change-Id: I3f911b74b646241c3b2449eaefe532071218af70
2023-11-01 09:11:19 +08:00
7c2c057f19
ENH: restrict the input range of z-hop
...
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ieca161bc7a52d6554efca5c0474d2a2fafb2da3c
2023-11-01 09:11:19 +08:00
a02f700c5d
ENH: add more info in header block
...
Add filament density and filament diameter in header block
Add max z height in header block
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I128f9bde4188882baed76340e3f9d752d8a9b645
2023-11-01 09:11:19 +08:00
d223e31c24
fix: Typo styling issue
2023-10-16 09:17:14 +08:00
b7bb3c5ae2
add: Ukrainian language to preferences settings
2023-10-16 09:17:14 +08:00
5ef759ce41
Fix formatting on _L
2023-09-07 14:15:05 +08:00
b5a5e3ce9e
Add ModelIO support on macOS
2023-09-07 14:15:05 +08:00
c460504e3e
FIX: Typo with dropped
...
Change droped to dropped for flow rate calibration fail.
2023-08-11 20:23:06 +08:00
93f94bf07c
FIX:FIX BUG on Buried
...
Change-Id: Id7a1d6c3686377c8f77b6071cc9e0754d5d31bbf
2023-08-01 22:09:01 +08:00
2dde3708d1
FIX: add protection to fix crash when mesh boolean
...
when the split has no effect
we should return directly
Change-Id: I81510c3edea96e101abfedf77023264e06d7d35c
2023-08-01 22:09:01 +08:00
dbcfec8a32
ENH: mcut: disable debug related logic
...
found a crash in dump_mesh,
disable debug currently
Change-Id: I9f210ce074333e95233af08d3e782546107091dd
2023-08-01 22:09:01 +08:00
fcb7db2dde
FIX:Fix bugs caused by buried points
...
Change-Id: I47d4e786912120124c134404afce15dec48c7974
Signed-off-by: Kunlong Ma <kunlong.ma@bambulab.com>
2023-08-01 22:09:01 +08:00
85e2868110
FIX: CLI: fix a compatible check issue for old printer and process
...
Change-Id: I74c75984d1abd0d1c52d8d4a19b6410c0041f280
2023-07-31 14:29:15 +08:00
d1ba5cf9a4
ENH: miss extruder_type in the list
...
Signed-off-by: salt.wei <salt.wei@bambulab.com>
Change-Id: I3450b98b2ccf33a5b823729ada454dfd6ad475c1
2023-07-31 14:29:15 +08:00
6ce4a6c5f2
ENH: modify chamber_temperature to array
...
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: I8c1afc85ff91ebf4458871fecba5f2f1f1e32f1d
2023-07-31 14:29:15 +08:00
153c9517ce
FIX: fix the crash issue #1944 caused by wronog thread name in some
...
corner cases
this patch is cherry-picked from PrusaSlicer's 84722876012ca310e29b291e10fef9d18ae26cea
thanks to 'Vojtech Bubnik' for the fix
Implementing a test whether the current thread is the main (UI) thread
and using it on AppConfig::save() to assert if save is called
from a worker thread.
The old assert was using thread names, which did not always work
on Windows.
Fixes #7839 #9178 #9370 #9420
2023-07-31 14:29:15 +08:00
793c657b46
ENH: remove nozzle_hrc in params page and profiles
...
use std::map to map nozzle_type to nozzle_hrc
Signed-off-by: xun.zhang <xun.zhang@bambulab.com>
Change-Id: Ie9d1db486808bd5164c7952caecaf4ac279f43d8
2023-07-31 14:29:15 +08:00
0c45cac1a8
ENH: CLI: refine some logic of repetions and load configs
...
1. when object skipped, it should not be duplicated
it is set to unprintable before arrange
and the plate needs to be considered a skipped plate also
2. skip the wipe tower if not multi-color after skip
3. load default configs if there are no configs loaded
4. refine the result.json to include key_values
Change-Id: I8c132cabcdd78756673fe900267a226a41ae1b4d
2023-07-31 14:29:15 +08:00
09c94acfcf
FIX: set n value to 0 by default in extrusion_cali_set
...
Change-Id: Ib3c34608413cdde1078c11c6e0cb6ca8a0c02d56
2023-07-31 14:29:15 +08:00
90e0184313
ENH: adjust imgui plate thumbnail color
...
Change-Id: Iec5cb3162c55e44eef2c67a3e5d8c65b5eadd785
2023-07-31 14:29:15 +08:00
e9182b2d1d
FIX:fixed UI display error in the monitor page
...
fixed STUDIO-3754
Change-Id: I96f9e52a9924b7f34e8e6ac7139ca70514af79ae
2023-07-31 14:29:15 +08:00
8c29a57be4
ENH: CLI: add logic of uptodate_settings
...
1. load the updated machine/process config from uptodate_settings
2. if don't have uptodate_settings, keep the logic as before, use from local
Change-Id: I3520469ab6094f03895b8e0e4e84c7549190f244
2023-07-31 14:29:15 +08:00
99bbce0f0f
ENH: CLI: add the repetitions logic
...
support to duplicate object in a plate
Change-Id: I6bc964a2b9660adf3be7919f230524c979da9d50
2023-07-31 14:29:15 +08:00
ce06bb08aa
FIX: crash when the text has only spaces STUDIO-3661
...
Change-Id: Ib433e3afbe8b161f42b0d907e9d78dbc93569cdf
2023-07-31 14:29:15 +08:00
cd8e7e80ba
FIX: Calibration supplementary translation
...
Change-Id: Id4203f55e921dc5c1d1d462f7dcacd262d88c603
2023-07-31 14:29:15 +08:00
8ae8b6b878
FIX: wrong text encoding [STUDIO-3753]
...
Change-Id: Ie05367ab294c87426dc4ce534ffb28a183a447bf
2023-07-31 14:29:15 +08:00
5328d346c7
FIX: calibration history window item be cut off [STUDIO-3742]
...
Change-Id: I60a7b35ebb87d00f5fcf04ad8f1a038bfdd71f36
2023-07-31 14:29:15 +08:00
9da629003a
FIX: the position of wipe tower is not correct when switch printer
...
Change-Id: Ia3195834c13f4341d6a020afe52e22370385eaee
2023-07-31 14:29:15 +08:00
d488363095
FIX: use metadata with related index for shared volume
...
Change-Id: If5ef2e9245a88666600eab0e5f6b92dc8ab3fb14
2023-07-31 14:29:15 +08:00
6849fdb912
FIX:fixed translation issues in Chinese
...
Change-Id: I39382db4a98bf92ee8a58e5f4c9dddb5fc88052f
2023-07-31 14:29:15 +08:00
d2b59b3b61
FIX:fixed k value not displaying
...
Change-Id: I46ea4877174da1a1b82e5005aa328ab10584a0cb
2023-07-31 14:29:15 +08:00
35fc842fe9
FIX: not reset cali status when save result fail
...
Change-Id: Ice7df7c5ecab7da77e16414b368213b130aa4ad2
2023-07-31 14:29:15 +08:00
3022064760
FIX: [STUDIO-3758] detach presets sync thread
...
Change-Id: I4421aba7ccea6b136146993ae2cd744749a6b40c
2023-07-31 14:29:15 +08:00
ea2aca6fb5
FIX: [STUDIO-3720] limit max_recent_count characters
...
Change-Id: I61dd6d5adfd057c9d068ab94ce36d9ab2395002b
2023-07-31 14:29:15 +08:00
0fc5c074cf
FIX: thumbnail: fix the thumbnail wrongly clip issue
...
Change-Id: I0f2040b8263aa3ea5c82278eabc8e6d0845bfa73
2023-07-31 14:29:15 +08:00
387f8838f2
ENH: CLI: add logic to translate objects between different bed size
...
1. from small bed to larger one, auto translate the models based on center;
2. from large bed to smaller one, report an error
Change-Id: I7b7fac1e370ff4daca82c4f36977a86fca268625
2023-07-31 14:29:15 +08:00
bb4f425027
ENH: add the error codes return logic
...
1. write a json to the outputdir
2. including message/error code/plate id
Change-Id: If2a13a89d34982a86102162c9c968cdf60702f19
2023-07-31 14:29:15 +08:00
903b6f0cb0
ENH: modify naming of save page
...
Change-Id: I13299c292d0a43f6b261022b2dea736a16b5b3cb
2023-07-31 14:29:15 +08:00
be21570964
NEW:Add buried points for printing and machine control
...
Change-Id: I4ba4786fc1d343e497717a012d6e18aee22324e1
2023-07-31 14:29:15 +08:00
83e76b6b58
FIX:Fix display issues
...
Change-Id: I40ec4ac6feb4bfb00d54047466f0a3df568ed88b
2023-07-31 14:29:15 +08:00
b3f519a0d4
NEW:Add buried points at panel buttons
...
Change-Id: Idfdcd964b03ea06e832e9e7c2cfaac232212f518
2023-07-31 14:29:15 +08:00
a321121acc
FIX: the option to adjust the first layer flow
...
Change-Id: Icf0c2686cc78c26724438ddc80d1894ac50ec179
Signed-off-by: wenjie.guo <wenjie.guo@bambulab.com>
2023-07-31 14:29:15 +08:00
646cd5a209
FIX: dark mode text display
...
Change-Id: I4089509d12180e454c4a052696f46eea66ea4ee0
2023-07-31 14:29:15 +08:00
bf77b9208f
FIX: [STUDIO-3578] safe darkUI for send to sd dialog
...
Change-Id: I9be144ae5272c900a3e770045bb24d531f939770
2023-07-31 14:29:15 +08:00
a1b243f2d9
FIX: remove hover bitmap
...
reset a hover bitmap lead to dark color be reset
Change-Id: I779a0a63403ae1b8555018359765285c86fc5d47
2023-07-31 14:29:15 +08:00
4d8ad0003b
FIX: linux darkmode text display
...
Change-Id: I2c935647669dd9743cf4a230ef21e48ea4b92eb8
2023-07-31 14:29:15 +08:00
59b6b59a9a
FIX: cannot calibrate when printer is offline [STUDIO-3387]
...
Change-Id: I93cf532363bc41feee0deb9782906bd3e79ee127
2023-07-31 14:29:15 +08:00
90e1ed7335
FIX: cali status recover incorrect after save result
...
STUDIO-3602
Change-Id: I1a47e40ca4d571ab37f52b87109d809279d3145e
2023-07-31 14:29:15 +08:00
583c6c86c2
FIX: [STUDIO-3725] sync user presets go to wrong folder
...
Change-Id: I99348ebbf6f3deae471bc5078a0645b81663bf3a
2023-07-31 14:29:15 +08:00
83cd88d4b8
FIX: [STUDIO-3578] send to sd darkUI not changed
...
Change-Id: I86d687bedd87222c9c59e6fd4466b57abe867640
2023-07-31 14:29:15 +08:00
2515a1adf7
FIX: [STUDIO-3513] the objectlist always enters wxEVT_SIZE
...
the objectlist always enters wxEVT_SIZE when scaling
Change-Id: I93371cee86437bc0309f041b0d59f28bc3b206aa
2023-07-31 14:29:15 +08:00
2aca9da207
ENH: update version to 01.07.01.51
...
Change-Id: I073dc8bae007202c18af863ae6a0f327eb76774f
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-07-31 14:29:15 +08:00
73c64535c7
FIX: not track dup error for user triggered liveview
...
Change-Id: I4b744caf14deca3cb6372f44e95aea131a45ec6a
2023-07-31 14:29:15 +08:00
1797f4ac8e
FIX: WebView: not wrap javascript
...
Change-Id: If2b1fe8163599ebbfd97334115a786a8985bf876
2023-07-31 14:29:15 +08:00
e010fad242
FIX: k value of ams control is not correct
...
modify the method for using printer type
Change-Id: Ica864c19f4ad3e58e4f478e078b55fc11485901a
2023-07-31 14:29:15 +08:00
2ad8d08def
ci: update network module based on commit 7040617
...
Change-Id: Ibcd1880a93b47b288047728561badf0907869244
(cherry picked from commit 4e2b25645c6fab2d31a95618c86d636042999b68)
2023-07-31 14:29:15 +08:00
f542b6321e
FIX: cannot open saved 3mf with & in model name
...
STUDIO-3690
Change-Id: I44cbccf6692910f7cbf331a6cea4f05caa25c45a
2023-07-31 14:29:15 +08:00
9d9673116d
FIX: tree support didn't work with enforcer
...
Enforcers should also subtract the lower polygons to get overhang areas.
Jira: STUDIO-3692
Github: #2045
Change-Id: I70f4aaae13826efc624e9bc942d2d11e9b1df1a1
(cherry picked from commit fc3d9b24ac1eb14e259488c94fca3469f319b368)
2023-07-31 14:29:15 +08:00
44fdfe8fff
FIX: tree(manual) didn't support well
...
1. We have a logic to add supports at corners for tree(auto), now I extend
it to tree(manual) also.
2. Only show support_critical_regions_only option to tree(auto).
Github: #2008
Change-Id: I161444da93464fd2ef0e0f3b40a0c5852beba351
(cherry picked from commit af4efb4aadc2a4d16de3eea881c6610955985fff)
2023-07-31 14:29:15 +08:00
24bd494ad9
FIX: X1 low version firmware does not display k value
...
Change-Id: I7539f0f09d3ddbaf7d1b616ae98ff5a3c1462f37
2023-07-31 14:29:15 +08:00
53f9d89a5a
FIX: [STUDIO-3561] Import Gcode and send all plate
...
Change-Id: Ic1db0d90e08dba24cde12cdfaa6f1227d5d602cf
2023-07-31 14:29:15 +08:00
3a9b49abeb
ENH: add restriction of selecting preset [STUDIO-3715]
...
1.forbid PEI Plate when PA Auto-Calibration
2.add ams black list
3.TPU cannot use when PA Auto-Calibration
Change-Id: I6a7d0438ba136f5685e5f3b868d5c063ed8ca9ef
2023-07-31 14:29:15 +08:00
04c6964de4
FIX: calibration history dialog flickering
...
Change-Id: Ife2720553f1e67292d7e222bda89b0d7f417e382
2023-07-31 14:29:15 +08:00
3c29f34e73
ENH: show calibration result failed info
...
Change-Id: I07b8d2d5065ea7e77084d6eae8988e5ab7008172
2023-07-31 14:29:15 +08:00
619cb8eeff
NEW: [STUDIO-3710] add Bambu Cube V2
...
Thank you very much to Thrutheframe for providing us with a very
valuable model for our software. We sincerely appreciate your time and
effort in helping us improve the project. Here is the model address:
https://www.printables.com/model/222285-bambu-lab-xyz-calibration-cube .
Thank you again, Thrutheframe.
Change-Id: I200fd23ab7a09683b2610664c8e09ae53fc42133
2023-07-31 14:29:15 +08:00
9d552ddb10
FIX: [STUDIO-3564] Select an object display quantity 1
...
Select an object with multiple parts and display quantity 1.
Simultaneously fixing that when all parts under an object are selected,
only the information of that object is displayed.
Change-Id: I7fd68615aed75f4b0592c61f4b916783e7c4182a
2023-07-31 14:29:15 +08:00
8ee1109746
FIX: encoding of mesh boolean text
...
Change-Id: I3d21f10d9f4e3022c702ff2b5493cf8bb94c881c
2023-07-31 14:29:15 +08:00
7430700b8e
FIX: the convexhull of first layer is wrong during making skrit
...
to avoid integer overflow during the polygon operations in make_brim(),
plateoffset is applied during gcode generation. This results in a wrong
first layer convexhull "m_first_layer_convex_hull" which is used in _make_skrit().
This patch fixs this issue.
JIRA: https://jira.bambooolab.com/browse/STUDIO-3719
Change-Id: Icfe21f4dbab05cc9e1c6f668791a62f954c2e0e5
(cherry picked from commit 6286b3e447b7ac7cbc061dca435091094783f74b)
2023-07-31 14:29:15 +08:00
3f924b79d6
FIX: param page scroll field position
...
Change-Id: Iefb363073d79b3f69022f555e99193a1ba2a2e07
2023-07-31 14:29:15 +08:00
282c785304
FIX: [STUDIO-3551] pass worker thread id to DirectShow
...
Change-Id: If55e39768ec1e43103c59168b139bb115db6b092
2023-07-31 14:29:15 +08:00
53890cf106
ENH:use user settings when not using PEI bed
...
fixed https://github.com/bambulab/BambuStudio/issues/2014
1. Disable flow calibration when using PEI bed
2. Use user settings when PEI bed is not in use
Change-Id: Ie4f81f0d4649c69255f97355af14cacedf8b2bbf
2023-07-31 14:29:15 +08:00
386607a6a7
ENH:actively select a printer on the calibration page
...
fixed:https://github.com/bambulab/BambuStudio/issues/2054
Change-Id: I087eebcda934c4f2447f2dc6e473a8389e9d4a25
2023-07-31 14:29:15 +08:00
5f8e285624
ENH:add an error that requires a done operation
...
Change-Id: I9824658ee3a847e70e979640c51a34d812fe284d
2023-07-31 14:29:15 +08:00
ce051c34d2
FIX: CLI: fix the crash caused by plate name snapshot
...
Change-Id: I757597609c05c8eeabcb3011c9638ba5adee4904
2023-07-31 14:29:15 +08:00
8f67181fd9
FIX:fixed the style of the retry button
...
Change-Id: I915a71d6b9891041feadc8e0fbd719c7e4d87a2d
2023-07-31 14:29:15 +08:00
a2da7e391b
ENH: thumbnail: optimize the thumbnail
...
1. set background to transparent
2. set the view to iso
Change-Id: Ib3371e60bea743ade55430a5d39b58f9b9acf050
2023-07-31 14:29:15 +08:00
53787b4c9e
ENH: refine calibration UI layout
...
1. adjust layout of every cali page
2. add tips panel about how to use PA result factor
3. modify PA start page text
Change-Id: I5e9d4f9ab63e231289ac2b0db5efee158ddee7f5
2023-07-31 14:29:15 +08:00
1f30783f11
FIX: undo/redo plate name
...
Change-Id: Ic47d399ecce25db4a5b6cbd1f58b821c6cb36136
(cherry picked from commit 0c11d73777d507381419d928549143c9ee56682d)
2023-07-31 14:29:15 +08:00
19525b6564
FIX: let independent support layer height option show all time.
...
STUDIO-3703
Change-Id: Ib67f9a9894cca8cb391bcceae087f026c0060f4d
(cherry picked from commit 6c4bdcf1b7dbf8f55ec7bf5186ba3ccdde75e611)
2023-07-31 14:29:15 +08:00
a5506576fd
ENH: Revert "SidePopup actively destroys the window after closing"
...
This reverts commit 4e1ac98a089b4391699a333185150f468ddc42a1.
Reason for revert: bug
Change-Id: Ifc5c0596b0993d4e20f5b9e167e0ad5aaed92020
2023-07-13 18:34:17 +08:00
f03d28c13b
FIX: add filament type for flow rate slice info
...
Change-Id: I21cee225cc4349774216eda730ba086bf3697b00
2023-07-13 10:35:05 +08:00
031a678ea0
FIX: ModelMetadata is zipped without subpath, not substract it
...
Change-Id: I5af608b1aa312bfab79bbdea09e99f8b4b2de5de
2023-07-13 10:35:05 +08:00
02f2e51c2e
FIX: pass error from gstreamer to wxMediaCtrl
...
Change-Id: If275d0ebeb7089f67ad366811dc48009b86af564
2023-07-13 10:35:05 +08:00
34ba0612c4
FIX: crash when save P1P pa cali result
...
Change-Id: I28cebba490210a998d07ed779f04adea89a83191
2023-07-13 10:35:05 +08:00
1223d6f900
FIX: pressure advance unrecogized
...
while the newer version of 3mf be load to older software
pressure_advance be unrecogized
Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: Ie160759f58e573f8ad01a2941763016e9b070e9e
2023-07-13 10:35:05 +08:00
a85e817e15
FIX: selected preset is not correct when switch printer
...
Change-Id: I82d5155a279e36e02f439475839f79cdb738063c
2023-07-13 10:35:05 +08:00
e9e7873b5c
FIX:ip address dlg&no help images displayed
...
Change-Id: I8c55ab3e8d466499a7a790938f41151690bc0d65
2023-07-13 10:35:05 +08:00
dbc7e3a856
ENH:SidePopup actively destroys the window after closing
...
fixed STUDIO-3525
Change-Id: I6ae33e8c73694c574a26126abbcf1074807abdd8
2023-07-13 10:35:05 +08:00
69f69b8eb3
FIX:fixed error msg cannot be displayed in the bind dialog
...
Change-Id: Id64a755c91eed08dc5c9beeea17959b16ea4f4f0
2023-07-13 10:35:05 +08:00
8ebe2fb4d3
FIX: select preset in modifying, the preset is null
...
Change-Id: If002b614af542c351c26b12a77123e3ce26f8301
2023-07-13 10:35:05 +08:00
6a3f7e5cbe
FIX: probabilistic errors occur when flow rate cali(manual)
...
Probabilistic errors occur during the calibration process, resulting in the inability to continue the flow rate calibration
Change-Id: I132b08755383f358c5573610a51f91aacf912ca9
2023-07-13 10:35:05 +08:00
3e322d53fc
FIX: replace user preset name with sys preset name
...
Change-Id: I8469224c9443049bb8b2b1c0feee3bdc4335a7ea
2023-07-13 10:35:05 +08:00
bc469bdcb6
NEW:Revert "add pause print message"
...
This reverts commit f24178896e2e9701165a3a5df8e711489beb34e5.
Reason for revert: pause
Change-Id: Ie55d14143a9e5ea9d593cb2ff0196688f3b0345e
2023-07-13 10:35:05 +08:00
28ed757701
FIX: add validation when save calibration result
...
Change-Id: I694c038f98ea6cbd2fe44dfe624c8afdf56cc9ac
2023-07-13 10:35:05 +08:00
cbd67c17d9
FIX: P1P PA save value to error tray when switch printer
...
Change-Id: I2b136e47f99ecd98cf4d89865f48f360a9ee03dc
2023-07-13 10:35:05 +08:00
1520215d99
FIX: delay start tunnel mqtt when deivce is busy
...
Change-Id: Ied28a74a35d9be54aa55f157aff8352160d85535
2023-07-13 10:35:05 +08:00
7b6bb82d6b
ENH: fix track record logic
...
Change-Id: If2953bd3ed9ce1c156f805e551dbe4d99b895737
2023-07-13 10:35:05 +08:00
44b232bcae
FIX: fix some display problem
...
1. check the flow rate save name valid
2. fix the crash when saving with Chinese symbols
3. handle the display of Chinese symbols
Change-Id: I3abe99ba17b2cc5893431d48de11a9597bf489a6
2023-07-13 10:35:05 +08:00
0366e52d86
FIX: calibrate button layout [STUDIO-3595]
...
Change-Id: I98f6d6a1d9607b9b1e3db343da854d09ce3c5336
2023-07-13 10:35:05 +08:00
9b797fa985
FIX: string_to_float not work as expected in some language
...
Change-Id: I2ea4e5547d48167f066638378417a30b1b0c82ac
2023-07-13 10:35:05 +08:00
43b1464bf3
FIX: deleted plate name donot update
...
fix the issue of deleting plate name after entering some character
Change-Id: I572a922b05b3f5e83ad956a7b4fb197430f13df5
(cherry picked from commit bfb5f58e1d29a6f518915882736453fe425ad984)
2023-07-13 10:35:05 +08:00
ba882b8ca2
FIX: didn't update ext spool comboBox filaments
...
Change-Id: I5c2d12952b1b3a4f12e1110ff2635eb17e4eccef
2023-07-13 10:35:05 +08:00
8bc3a6df30
FIX: flush logs on crash
...
Change-Id: Ifc3a9c087dfe4d437b658e305db6f986fa181fab
2023-07-13 10:35:05 +08:00
fefd13a4ac
FIX: big thumbnail send by multi-frame
...
Change-Id: Ia3a88fb53b8cc27d20fa976822c91c09b4442d71
2023-07-13 10:35:05 +08:00
86a7de4557
FIX: flush menu item crash
...
Change-Id: I632da563eb6be000c7eb9238fd25d3fa07ecce0e
2023-07-13 10:35:05 +08:00
86bd65f096
FIX: [STUDIO-3619] avoid quick play/stop when switch to device
...
Change-Id: I957dc1e06e227a721824fe1448bdb5b6a57cbe7e
2023-07-13 10:35:05 +08:00
3f71c21771
FIX: [STUDIO-3621] release note title label size
...
Change-Id: I78a039f3ff656f02b43666fbb05f18459568f9ab
2023-07-13 10:35:05 +08:00
9bc72ce339
FIX: c12 version parse
...
Change-Id: I30461a306adbc2ddc5f3b9ee460369b655755d4e
2023-07-13 10:35:05 +08:00
d3cc111bd8
FIX: the bed temp always use cool plater for manual cali
...
github-1994
Change-Id: Ic28a42897a889e91f1c5003a231aca375a23e1d8
2023-07-13 10:35:05 +08:00
7123bac72a
FIX: Prompts version incompatibility when start cali
...
STUDIO-3616 Switching from U4 firmware to U6 firmware, calibration prompts version incompatibility
Change-Id: I42cbc5057765b9a3b06bb100763995c14f5f1e69
2023-07-13 10:35:05 +08:00
b19c42ad4d
NEW: add config for C12
...
Change-Id: I80d8ce0a31a18f87cf72823a1a90c351b43c88e4
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-07-13 10:35:05 +08:00
85f3145ea5
Fix mcut for GCC 13
...
GCC 13 requires an explicit #include <cstdint> for the std::uint32_t data type used by this file. Adding this include allows for the whole project to successfully be compiled on GCC 13
2023-07-10 12:02:11 +08:00
d304ee8717
FIX: modify the flow rate cali button type
...
Change-Id: I7aa1254564c120e93a104065971e7c1626785411
(cherry picked from commit 29385e71d00d264e2aaf6cf6181156d6ed9f6bc1)
2023-07-07 21:17:48 +08:00
a93d09cc30
FIX:fixed wrong dev_id of printer object
...
The current printer object was not determined when restoring calibration data from appconfig
Change-Id: I2b74ee5911aef27e91136b8f6051a66199419d56
2023-07-07 21:17:48 +08:00
225095d938
FIX: fix bed type error when loading from project
...
Change-Id: I13a6f46e4516f5237b006fff848ef5e75bbb30de
Signed-off-by: Stone Li <stone.li@bambulab.com>
2023-07-07 21:17:48 +08:00
6929e1ea45
FIX: wrong pop dialog when all results are failed
...
Change-Id: I50acb15ea7541b619472622a1715b99396fcad69
2023-07-07 21:17:48 +08:00
07ee63d940
FIX: operator priority error
...
Change-Id: Ie3abc4e2a307b3cfc31cecbf8fb151115dde4021
2023-07-07 17:52:43 +08:00
85a43216d6
FIX: ext spool name display
...
Change-Id: I4b5af5814f1f5cb46262725cb63d7d7597e0f8b7
2023-07-07 17:52:43 +08:00
35f0a550ad
FIX: modify the disable next button type
...
Change-Id: If9f6635bb2921bc0479ac51c409181dbcddb0741
2023-07-07 17:52:43 +08:00
hu.wang
maosheng.wei
Arthur
zhimin.zeng
chunmao.guo
tao wang
salt.wei
liz.li
zhou.xu
shuai.liu
xun.zhang
enricoturri1966
lane.wei
Kunlong Ma
Stone Li
wintergua
Lukáš Hejl
slynn1324
manch1n
gerrit
igiannakas
wenjie.guo
qing.zhang
PavelMikus
thewildmage
Scott Mudge
Dmytro Chystiakov
Merikesh Dev
James Ding
Vojtech Bubnik
Arsalan Afzal